S93L76A Datasheet, PDF (1/37 Pages) Seiko Instruments Inc – LOW VOLTAGE OPERATION 3-WIRE SERIAL E2PROM

S-93L76A
www.sii-ic.com
© SII Semiconductor Corporation, 2004-2015
LOW VOLTAGE OPERATION
3-WIRE SERIAL E²PROM
Rev.6.0_02
The S-93L76A is a low voltage operating, high speed, low current consumption, 3-wire serial E²PROM with a wide operating
voltage range. The S-93L76A has the capacity of 8 K-bit, and the organization is 512-word × 16 bit. It is capable of
sequential read, at which time addresses are automatically incremented in 16-bit blocks.
The communication method is by the Microwire bus.
 Features
• Operating voltage range:
Read
1.6 V to 5.5 V
Write
1.8 V to 5.5 V (WRITE, ERASE)
2.7 V to 5.5 V (WRAL, ERAL)
• Operating frequency:
2.0 MHz (Vcc = 4.5 V to 5.5 V)
• Write time:
10.0 ms max.
• Sequential read capable
• Write protect function during the low power supply voltage
• Endurance:
10⁶ cycles / word^*1 (Ta = +85°C)
• Data retention:
100 years (Ta = +25°C)
20 years (Ta = +85°C)
• Memory capacity:
8 K-bit
• Initial delivery state:
FFFFh
• Operation temperature range: Ta = −40°C to +85°C
• Lead-free, Sn 100%, halogen-free^*2
*1. For each address (Word: 16-bit)
*2. Refer to “ Product Name Structure” for details.
 Packages
• 8-Pin SOP (JEDEC)
• 8-Pin TSSOP
• TMSOP-8
Caution
This product is intended to use in general electronic devices such as consumer electronics, office
equipment, and communications devices. Before using the product in medical equipment or
automobile equipment including car audio, keyless entry and engine control unit, contact to SII
Semiconductor Corporation is indispensable.
1