|
S-8213AAB-I6T1U Datasheet, PDF (1/28 Pages) Seiko Instruments Inc – BATTERY PROTECTION IC FOR 2-SERIAL | |||
|
S-8213 Series
www.sii-ic.com
BATTERY PROTECTION IC FOR 2-SERIAL / 3-SERIAL CELL PACK
(SECONDARY PROTECTION)
© SII Semiconductor Corporation, 2012-2015
Rev.1.3_03
The S-8213 Series is used for secondary protection of lithium-ion rechargeable batteries, and incorporates a high-accuracy
voltage detection circuit and a delay circuit. Short-circuits between VC3 to VSS accommodate serial connection of two cells or
three cells.
ï® Features
⢠High-accuracy voltage detection circuit for each cell
Overcharge detection voltage n (n = 1 to 3)
4.10 V to 4.50 V (in 50 mV steps)
Accuracy: ±25 mV (Ta = +25°C)
Accuracy: ±30 mV (Ta = 0°C to +60°C)
Overcharge hysteresis voltage n (n = 1 to 3)
0 V ± 25 mV, â0.05 V ± 25 mV, â0.40 V ± 80 mV
⢠Delay times for overcharge detection can be set by an internal circuit only (external capacitors are unnecessary)
⢠Output form is selectable:
CMOS output, Nch open-drain output
⢠Output logic is selectable:
Active "H", Active "L"
⢠High-withstand voltage:
Absolute maximum rating 26 V
⢠Wide operation voltage range:
3.6 V to 24 V
⢠Wide operation temperature range: Ta = â40°C to +85°C
⢠Low current consumption
At VCUn â 1.0 V for each cell:
2.0 μA max. (Ta = +25°C)
At 2.0 V for each cell:
0.3 μA max. (Ta = +25°C)
⢠Lead-free (Sn 100%), halogen-free*1
*1. Refer to "ï® Product Name Structure" for details.
ï® Application
⢠Lithium-ion rechargeable battery pack (for secondary protection)
ï® Packages
⢠SOT-23-6
⢠SNT-6A
1
|
▷ |