GP1S196HCZ0F Datasheet, PDF (6/11 Pages) Sharp Electrionic Components – Gap : 1.1mm, Slit : 0.3mm Phototransistor Output, Compact Transmissive Photointerrupter

GP1S196HCZ0F/GP1S196HCZSF
■ Design Considerations
● Design guide
1) Prevention of detection error
To prevent photointerrupter from faulty operation caused by external light, do not set the detecting face to
the external light.
2) Position of opaque board
Opaque board shall be installed at place 1.4mm or more from the top of elements.
(Example)
1.4mm or more
1.4mm or more
This product is not designed against irradiation and incorporates non-coherent IRED.
● Degradation
In general, the emission of the IRED used in photointerrupter will degrade over time.
In the case of long term operation, please take the general IRED degradation (50% degradation over 5
years) into the design consideration.
● Recommended Foot Print (Only for GP1S196HCZSF)
3.7
1.65
Sheet No.: D3-A01001EN
6