GP1S196HCZ0F Datasheet, PDF (2/11 Pages) Sharp Electrionic Components – Gap : 1.1mm, Slit : 0.3mm Phototransistor Output, Compact Transmissive Photointerrupter

■ Internal Connection Diagram
Top view
2
1
1 Anode
2 Collector
3 Emitter
4 Cathode
3
4
GP1S196HCZ0F/GP1S196HCZSF
■ Outline Dimensions
Through-Hole [GP1S196HCZ0F]
Top view
a
4^−(R0.2)
a' _{2−(1.62)}
3.1
1.1
0.4
Identification
mark
Gate
a-aʼ
position
section
(0.3)
Slit width
(0.75)
Center of
light path
∗2 _4−0.15
(2.15)
(1.05)
Same potential
as 1
3
4
4−0.3
∗1.3
2
1
Same potential as 3
• Unspecified tolerance : ±0.1mm.
• Dimensions in parenthesis are shown for reference.
• The dimensions indicated by ∗ refer to those measured from the
lead base.
• The dimensions shown do not include those of burrs.
Burr's dimensions : 0.15mm MAX.
• The lead may be exposed at the painting out portion.
• There is agreer identification mark on he light emitting side.
(Unit : mm)
SMT Gullwing Lead-Form [GP1S196HCZ0F]
Top view
a
4^−(R0.2)
a' _{2−(1.62)}
3.1
1.1
0.4
Identification
mark
Gate
a-aʼ
position
section
(0.3)
Slit width
∗3.2^±0.2
(0.75)
Center of
light path
∗4−0.3
∗1.3
(2.15)
(1.05)
Same potential
as 1
3
4
2
1 _{∗2−1.85}
Same potential as 3
• Unspecified tolerance : ±0.1mm.
• Dimensions in parenthesis are shown for reference.
• The dimensions indicated by ∗ refer to those measured lead
plating portion.
• The dimensions shown do not include those of burrs.
Burr's dimensions : 0.15mm MAX.
• The lead may be exposed at the painting out portion.
• There is agreer identification mark on he light emitting side.
Product mass : approx. 0.022g
Product mass : approx. 0.02g
Plating material : SnCu (Cu : TYP. 2%)
Country of origin
Japan
Sheet No.: D3-A01001EN
2