GP1USC31XP Datasheet, PDF (4/13 Pages) Sharp Electrionic Components – Infrared Detector for Remote Control

Preliminary
GP1USC3xXP Series
■ Electro-optical Characteristics
Parameter
Symbol
Condition
Operating supply voltage
Current dissipation
Output HIGH voltage
Output LOW voltage
Output HIGH pulse width
Output LOW pulse width
V_CC
I_CC
E_V = 0 lx (no light)
V_OH
V_OL
See Note 1
I_OL = 1.6 mA^*1
T₁
See Figure 2
T₂
See Figure 2
GP1USC30XP
GP1USC31XP
Bandpass Frequency center
ƒo
GP1USC32XP
GP1USC33XP
GP1USC34XP
Output pullup resistance
R_L
*^{1 The waveform shown in Fig. 1 was transmitted at the test part’s center frequency.}
Reception measurements were begun at transmission start and ended at pulse 50.
Fig. 1. Transmitted and Received Pulses
Transmitted signal
600 µs
1000 µs
Output signal
GP1USC3XP-5
T₂ T₁
Min. Typ. Max. Unit
2.7
5.5
V
—
0.35 0.6
mA
V_CC – 0.5 —
—
V
— 0.45
V
600
1200 µs
400
1000 µs
36
kHz
38
kHz
36.7
kHz
32.75
kHz
40
kHz
50
k
Sheet No.: OP08905
July, 2009
4