S112S01 Datasheet, PDF (3/5 Pages) Sharp Electrionic Components – SIP Type SSR for Medium Power Control

Fig. 1 RMS ON-state Current vs. Ambient
Temperature ( S112S01Series)
12
(1)
(4) ^{(3) (2)}
10
8
6
4
(5)
2
0
- 25 0
25 50 75 100 125
Ambient temperature T _a (˚C)
S112S01 Series/S116S01 Series
Fig. 2 RMS ON-state Current vs. Ambient
Temperature ( S116S01Series)
18
16
14
12
10
8
6
4
2
0
- 25
(3) (2)
(1)
(4)
(5)
0
25 50 75 100 125
Ambient temperature T _a (˚C)
( 1) With infinite heat sink
( 2) With heat sink ( 280 x 280 x 2 mm Al plate)
( 3) With heat sink ( 200 x 200 x 2 mm Al plate)
( 4) With heat sink ( 100 x 100 x 2 mm Al plate)
( 5) Without heat sink
( 1) With infinite heat sink
( 2) With heat sink ( 280 x 280 x 2 mm Al plate )
( 3) With heat sink ( 200 x 200 x 2 mm Al plate )
( 4) With heat sink ( 100 x 100 x 2 mm Al plate )
( 5) Without heat sink
( Note) With the Al heat sink set up vertically,tighten the device at the center of the Al heat sink with a torque
of 0.4N • m and apply thermal conductive silicone grease on the heat sink mounting plate. Forcible cooling
shall not be carried out.
Fig. 3 RMS ON-state Current vs.
Case Temperature
16
S116S01Series
14
12
S112S01Series
10
8
6
4
2
0
- 25 0
25 50 75 100 125
Case temperature T _c (˚C)
Fig. 4 Forward Current vs.
Ambient Temperature
60
50
40
30
20
10
0
- 25 0
25 50 75 100 125
Ambient temperature T _a (˚C)