LQ035Q7DH06 Datasheet, PDF (22/26 Pages) Sharp Electrionic Components – TFT-LCD Module

(14) Reliability Test Conditions for TFT-LCD Module
Table 14
No. Test items
1 High temperature storage test Ta=+70℃
Test conditions
240h
LCP-05020-19
2 Low temperature storage test Ta=-25℃
240h
3 High temperature and high Tp=+40℃ , 95%RH
240h
humidity operating test
(But no condensation of dew)
4 High temperature operating test Tp=+70℃
240h
5 Low temperature operating test Tp=-10℃
240h
6 Electro static discharge test
±200V・200pF(0Ω) to Terminals(Contact)
(1 time for each terminals)
±8kV・150pF(330Ω) to Housing bezel or TP(Contact)
±15kV・150pF(330Ω) to Housing bezel or TP(in Air)
7 Shock tset
980 m/s², 6 ms
±X,±Y,±Z 3 times for each direction
(JIS C0041, A-7 Condition C)
8 Vibration test
Frequency range: 10Hz～55Hz
Stroke: 1.5 mm Sweep: 10Hz～55Hz
X,Y,Z 2 hours for each direction (total 6 hours)
(JIS C0040,A-10 Condition A)
9 Heat shock test
Ta=-25℃～+70℃ / 5 cycles
(1h) (1h)
10 Point activation test
Hit it 1,000,000 times with a silicon rubber of R8 HS 60.
(Touch panel)
Hitting force :2.4N
Hitting speed : 3 times per second
11 Writing friction resistance test Slide Pen 100,000 times under following
(Touch panel)
conditions:
Pen : 0.8Rmm Polyacetal stylus
Load : 2.4N
Speed : 3 strokes per second
Stroke : 30mm
Testing apparatus : shown in Fig (I)
12 FPC Bending Test
Bending 30 times by bending radius R0.6mm and
angle=90°
(LCD FPC)
Bending 10 times by bending radius R1.0mm (T/P FPC)
Motor
Weight
250gf
Stroke 30mm
Touch Panel
Fig.(I)