LUYT801-S Datasheet, PDF (5/13 Pages) Seoul Semiconductor – Industry Standard PLCC SMT package

2. Absolute maximum ratings
Parameter
Symbol
Value
Unit
Power Dissipation
P_d
75
mW
Forward Current
I_F
30
mA
Peak Forward Current
I_FM ^*2
100
mA
Reverse Voltage
V_R
5
V
Operating Temperature
T_opr
-40 ~ +100
o_C
Storage Temperature
T_stg
-40 ~ +100
o_C
*1. Care is to be taken that power dissipation does not exceed the absolute maximum rating of the product.
*2. IFM was measured at Tw≤1 msec of pulse width and D≤1/10 of duty ratio.
*3. LED’s properties might be different from suggested values like above and below tables if operation condition
will be exceeded our parameter range.
3. Electro-Optical characteristics
Parameter
Forward Voltage
Reverse Current
Luminance Intensity ^*1
Peak Wavelength
Dominant Wavelength
Spectral Bandwidth 50%
Viewing Angle ^*2
Symbol Condition
Min
V_F
I_R
I_V
λ_P
λ_d
Δλ
2θ _½
I_F =20mA
1.8
V_R=5V
-
I_F =20mA
150
I_F =20mA
-
I_F =20mA
584
I_F =20mA
-
I_F =20mA
-
Typ
Max
Unit
2.1
2.5
V
-
10
μA
180
210
mcd
593
-
nm
587
592
nm
15
-
nm
120
-
deg.
*1. The luminous intensity IV was measured at the peak of the spatial pattern which may not be aligned with the mechanical
axis of the LED package. Luminous Intensity Measurement allowance is ±10%
*2. 2θ½ is the off-axis where the luminous intensity is 1/2 of the peak intensity.
*3. A tolerance of ±0.05V on forward voltage measurements.
Rev. 00
September. 2010
www.seoulsemicon.com
서식번호 : SSC-QP-7-07-24 (Rev.00)