RVAQ050GB1 Datasheet, PDF (2/8 Pages) Sensortechnics GmbH – Fully signal conditioned pressure transducers

RVA Series
Fully signal conditioned pressure transducers
PRESSURE RANGE SPECIFICATIONS
(V_S = 5.00 V, R_L > 100 kW, t_amb = 25°C)
Part number
RVAQ050GB...
RVAQ300GU...
RVAP015GU...
RVAP015GV...
RVAP030GU...
RVAP100GU...
RVAP150GU...
RVAP250GU...
RVAP500GU...
Operating pressure range
0 ... ±50 mmHg
0 ... 300 mmHg
0 ... 15 psig
0 ... -15 psig
0 ... 30 psig
0 ... 100 psig
0 ... 150 psig
0 ... 250 psig
0 ... 500 psig
Proof pressure¹
170 mmHg
650 mmHg
45 psi
30 psi
60 psi
200 psi
300 psi
500 psi
1000 psi
Sensitivity (typ.)
40.0 mV/mmHg
13.33 mV/mmHg
266.7 mV/psi
-266.7 mV/psi
133.3 mV/psi
40.0 mV/psi
25.7 mV/psi
16.0 mV/psi
8.0 mV/psi
Specification notes:
1. Proof pressure is the maximum pressure which may be applied without causing damage to the sensing element.
2. Non-linearity - the maximum deviation of measured output at constant temperature, from "Best Straight Line" through
three points (offset pressure, full scale pressure and 1/2 full scale pressure).
3. Thermal effects tested and guaranteed in the specified temperature ranges relative to 25°C. All specifications shown
are relative to 25°C.
4. Span is the algebraic difference between lowest and highest specified pressure.
5. Total accuracy is the maximum deviation from the 25°C reference transfer function at any pressure or temperature over
the specified ranges. This calculation includes null, span, linearity, hysteresis, repeatability, null shift and span shift.
6. Response time for 0 to full-scale pressure step change, readings taken at 10 % and 90 % of full-scale pressure.
E / 11701 / A
2/8
www.sensortechnics.com