100E016 Datasheet, PDF (8/9 Pages) SEMTECH ELECTRONICS LTD. – 8-Bit Synchronous Binary Up Counter

SK10/100E016
HIGH-PER.ORMANCE PRODUCTS
DC Characteristics
SK10/100E016 DC Electrical Characteristics (Notes 1, 2)
(V_CC – V_EE = 4.2V to 5.5V;V_CC = V_CCO; VOUT Loaded 50Ω to V_CC – 2.0V)
Symbol
I_IH
I_EE
Characteristic
Input HIGH Current
Power Supply Current
10E
100E
TA = –40^oC
Min Typ Max
150
TA = 0^oC
Min Typ Max
150
TA = +25^oC
Min Typ Max
150
TA = +85^oC
Min Typ Max Unit
150 µA
151 174
151 185
151 174
151 185
151 174
151 185
151 174 mA
151 185 mA
AC Characteristics
SK10/100E016 AC Electrical Characteristics
(V_CC – V_EE = 4.2V to 5.5V;V_CC = V_CCO; VOUT Loaded 50Ω to V_CC – 2.0V)
Symbol Characteristic
TA = –40^oC
Min Typ Max
TA = 0^oC
Min Typ Max
TA = +25^oC
Min Typ Max
TA = +85^oC
Min Typ Max Unit
f_COUNT
t_PLH
t_PHL
t_s
t_h
t_RR
t_PW
t_r, t_f
Maximum Count .requency
Propagation Delay to Output
CLK to Q
MR to Q
CLK to TC*
MR to TC*
Setup Time
Pn
CE*
PE*
TCLD
Hold Time
Pn
CE*
PE*
TCLD
Reset Recovery Time
Minimum Pulse Width
CLK, MR
Rise/.all Times (20 - 80%)
700 900
700 900
700 900
700 900
MHz
726 855 948 726 855 948 726 855 948 726 855 948 ps
666 775 876 666 775 876 666 775 876 666 775 876 ps
743 775 926 743 775 926 743 775 926 743 775 926 ps
656 738 820 656 738 820 656 738 820 656 738 820 ps
150 -30
150 -30
150 -30
150 -30
ps
600 400
600 400
600 400
600 400
ps
600 400
600 400
600 400
600 400
ps
500 300
500 300
500 300
500 300
ps
350 100
350 100
350 100
350 100
ps
0 -400
0 -400
0
-400
0
-400
ps
0 -400
0 -400
0
-400
0
-400
ps
100 -300
100 -300
100 -300
100 -300
ps
900 700
900 700
900 700
900 700
ps
400
400
400
400
ps
231 306 559 231 306 559 235 318 526 244 330 460 ps
Notes:
1. 10E circuits are designed to meet the DC specifications shown in the table after thermal equilibrium has
been established. The circuit is in a test socket or mounted on a printed circuit board and transverse
airflow greater than 500 lfpm is maintained.
2. The same DC parameter values apply across the full VEE range of –4.2 to –5.5V. 100E circuits are
designed to meet the DC specifications shown in the table where transverse airflow greater than 500 lfpm
is maintained.
3. For standard ECL DC specifications, refer to the ECL Logic Family Standard DC Specifications Data Sheet.
4. For part ordering descriptions, see HPP Part Ordering Information Data Sheet.
Revision 1/.ebruary 13, 2001
8
www.semtech.com