GS2970 Datasheet, PDF (2/145 Pages) Semtech Corporation – 3Gb/s, HD, SD SDI Receiver Complete with SMPTE Audio and Video Processing

Application: Multi-input Video Monitoring System
3G-SDI
Input 1
3G-SDI
Input 2
EQ
GS2984/
GS2974
EQ
GS2984/
GS2974
GS2970
20-bit
HV F / P CLK
GS2970
20-bit
HV F / P CLK
Video
Memory
Video
Formatter
HV /DE /P CLK
DVI/
VGA DAC
Video
Output
3G-SDI
Input n
EQ
GS2984/
GS2974
Analog
Sync
Sync
Seperator
GS2970
20-bit
HV F / P CLK
AES BUS
GS4911
Audio
Select
HV F /P CLK
Audio Clocks
On Screen
Display
Generator
Audio
Processor
AE S OUT 1/2
AE S OUT 3/4
AE S OUT 5/6
AE S OUT 7/8
Application: Multi-format Audio De-embedder Module
SD/HD/3G-SDI
EQ
GS2984/
GS2974
10-bit
P CLK
GS2962
SD/HD/3G-SDI
GS2970
AUDIO 1/ 2
AUDIO 3/ 4
AUDIO 5/ 6
AUDIO 7/ 8
Audio Clocks
Switch
Logic
&
Drivers
DAC
AES
Audio
Outputs
Analog
Audio
Outputs
Application: Multi-format Digital VTR/Video Server
V ideo Output
SD/HD/3G-SDI
EQ
GS2984/
GS2974
GS2970
20-bit
HV F /P CLK
AUDIO 1/ 2
AUDIO 3/ 4
AUDIO 5/ 6
AUDIO 7/ 8
Audio Clocks
Video
Processor
Audio
Processor
Storage :
Tape/HDD/Solid State
Audio Outputs
Description
The GS2970 is a multi-rate SDI Receiver which includes
complete SMPTE processing, as per SMPTE 425M, 292 and
SMPTE 259M-C. The SMPTE processing features can be
bypassed to support signals with other coding schemes.
The device features an Integrated Reclocker with an
internal VCO and a wide Input Jitter Tolerance (IJT) of 0.7UI.
A serial digital loop-through output is provided, which can
be configured to output either reclocked or non-reclocked
serial digital data. The serial digital output can be connected
to an external cable driver.
The device operates in one of four basic modes: SMPTE
mode, DVB-ASI mode, Data-Through mode or Standby
mode.
In SMPTE mode (the default operating mode), the GS2970
performs full SMPTE processing, and features a number of
data integrity checks and measurement capabilities.
The device also supports ancillary data extraction, and can
provide entire ancillary data packets through
host-accessible registers. It also provides a variety of other
packet detection and error handling features. All of these
processing features are optional, and may be individually
enabled or disabled through register programming.
Both SMPTE 425M Level A and Level B inputs are supported
with optional conversion from Level B to Level A for 1080p
50/59.94/60 4:2:2 10-bit inputs.
In DVB-ASI mode, sync word detection, alignment and
8b/10b decoding is applied to the received data stream.
In Data-Through mode all forms of SMPTE and DVB-ASI
processing are disabled, and the device can be used as a
simple serial to parallel converter.
The device can also operate in a lower power Standby
mode. In this mode, no signal processing is carried out and
the parallel output is held static.
Parallel data outputs are provided in 20-bit or 10-bit format
for 3Gb/s, HD and SD video rates, with a variety of mapping
options. As such, this parallel bus can interface directly with
video processor ICs, and output data can be multiplexed
onto 10 bits for a low pin count interface.
Up to eight channels (two audio groups) of serial digital
audio may be extracted from the video data stream, in
accordance with SMPTE 272M-C and SMPTE 299M.
The output audio formats supported by the device include
AES/EBU and I²S, and two other industry standard serial
digital formats. A variety of audio processing features are
provided to ease implementation. Audio clocks are
internally generated and provided by the device.
GS2970 3Gb/s, HD, SD SDI Receiver Complete with
SMPTE Audio and Video Processing
Data Sheet
47478 - 4
September 2012
2 of 145