|
LC88F58B0A Datasheet, PDF (3/25 Pages) Sanyo Semicon Device – FROM 128K byte, RAM 4096K byte on-chip 16-bit 1-chip Microcontroller | |||
|
◁ |
LC88F83B0A
ÂTimers
⢠Timer 0: 16-bit timer that supports PWM/toggle outputs
1) With 5-bit prescaler
2) 8-bit PWM Ã 2/8-bit timer + 8-bit PWM mode selectable
3) Clock source selectable from system clock, OSC0, OSC1, and internal RC oscillator
⢠Timer 1: 16-bit timer with capture registers
1) With 5-bit prescaler
2) May be divided into 2 channels of 8-bit timer
3) Clock source selectable from system clock, OSC0, OSC1, and internal RC oscillator
⢠Timer 3: 16-bit timer that supports PWM/toggle outputs
1) With 8-bit prescaler
2) 8-bit timer à 2ch/8-bit timer + 8-bit PWM mode selectable
3) Clock source selectable from system clock, OSC0, OSC1, and internal RC oscillator
⢠Timer 4: 16-bit timer that supports toggle outputs
1) Clock source selectable from system clock and prescaler 0
⢠Timer 5: 16-bit timer that supports toggle outputs
1) Clock source selectable from system clock and prescaler 0
⢠Base timer
1) Clock may be selected from OSC0 (32.768kHz crystal oscillator) and frequency-divided output of system clock.
2) Interrupts can be generated in 7 timing schemes.
ÂWatchdog Timer
1) Driven by the base timer + internal watchdog timer dedicated counter.
2) Interrupt or reset mode selectable
ÂSIO0: 8-bit synchronous SIO
1) LSB first/MSB first mode selectable
2) It is possible to communicate with 8 bits or less. (1 to 8 bits specifiable in 1-bit units)
3) Built-in 8-bit baudrate generator (transfer clock cycle 4 tCYC to 512 tCYC)
4) Automatic continuous data transmission (9 to 32768 bits specifiable in 1-bit units)
5) Interval function (interval time: 0 to 64 SIOCLKs specifiable in 1 SIOCLK units)
6) Wakeup function
ÂUART2: Asynchronous SIO
1) Full duplex transmission
2) Start bit 1, data bit 8 (LSB first), stop bit 1
3) Parity bit: None/even parity/odd parity
4) Transfer rate: 8 to 4096 tCYC
5) Baudrate source clock: systemclock/OSC0/OSC1
6) Wakeup function
ÂAD converter: 12bit à 4 channels
1) 12-/8-bit resolution selectable
2) Analog input: 4 channels
3) Comparator mode
4) Automatic reference voltage generation
No.A1228-3/25
|
▷ |