English
Language : 

LC86F3G64A Datasheet, PDF (3/25 Pages) Sanyo Semicon Device – 8-bit 1-chip Microcontroller
LC86F3G64A
• Various character attributes
Character colors
: 16 colors
Character background colors : 16 colors
Fringe / shadow colors
: 16 colors
Full screen colors
: 16 colors
Rounding
Underline
Italic character (slanting)
• Attribute can be changed without spacing
• Vertical display start line number can be set for each row independently (Rows can be overlapped)
• Horizontal display start position can be set for each row independently
• Horizontal pitch (9 to 16 dot)*1 and vertical pitch (1 to 32 dot) can be set for each row independently
• Different display modes can be set for each row independently
Caption • Text mode / OSD mode 1 / OSD mode 2 (Quarter size) / Simplified graphic mode
• Ten character sizes*1
Horiz. × Vert. = (1 × 1), (1 × 2), (2 × 2), (2 × 4)
(1.5 × 1), (1.5 × 2), (3 × 2), (3 × 4),
(0.5 × 0.5), (0.75 × 0.5)
• Shuttering and scrolling on each row
• Simplified Graphic Display
• External OSD clock input enable (LC863G00 series only)
Note *1: range depends on display mode : refer to manual for details.
„Data Slicer : closed caption format (LC863200/LC863800/LC863G00 series only)
• Closed caption data and XDS data extraction
• NTSC/PAL, and extracted line can be specified (LC863800/LC863G00 series)
• NTSC, and fixed line 21 (LC863200 series)
„Bus Cycle Time / Instruction-Cycle Time
Bus Cycle Time Instruction Cycle Time Clock Divider
0.424µs
0.848µs
1/2
7.5µs
15.0µs
1/2
91.55µs
183.1µs
1/1
183.1µs
366.2µs
1/2
System Clock Oscillation
Internal VCO
(Ref: X’tal 32.768kHz)
Internal RC
Crystal
Crystal
Oscillation Frequency
14.156MHz
800kHz
32.768kHz
32.768kHz
Voltage
4.5V to 5.5V
4.5V to 5.5V
4.5V to 5.5V
4.5V to 5.5V
„Ports
• Input / Output Ports
: 5 ports (28 terminals)
Data direction programmable in nibble units
: 1 port (8 terminals)
(If the N-ch open drain output is selected by option, the corresponding port data can be read in output mode.)
Data direction programmable for each bit individually: 4 ports (20 terminals)
• Input port (LC863300 series only)
: 1 port (1 terminal)
„AD converter
• 4-channels × 8-bit AD converters (LC863200/LC863800/LC863G00 series )
• 5-channels × 8-bit AD converters (LC863300 series)
„Serial interfaces
• IIC-bus compatible serial interface (Multi-master type)
Consists of a single built-in circuit with two I/O channels the two data lines and two clock lines can be short
circuited internally.
• Synchronous 8-bit serial interface
No.A0121-3/25