LA8518NM Datasheet, PDF (26/31 Pages) Sanyo Semicon Device – Signal Processor for Cordless Telephone Base Sets

LA8518NM
Usage Examples for Each Mode
1) ICM REC (In Coming Message Rec.)
c Recording incoming messages.
c Recording memos from an outside location (remote control from an outside location).
2) 2WAY REC
c Recording of both sides of conversations.
c Recording incoming messages.
3) DECT REC
c Recording memos using the microphone (recording messages to family or making simple recordings).
4) 2WAY BEEP
c An alarm sound is output from the speaker and recorded as an ICM, and is simultaneously output on the line and relayed to the
other party.
c Can be indicated to the other party that recording is in progress.
c Line output is reduced by 6 dB in comparison with other modes.
5) ICM OUT
c Playing back incoming messages.
c Listening to incoming messages from an outside phone.
c Transferring incoming messages.
c Playing back the memo recording.
6) ICM PLAY
c Playing back incoming messages.
c Playing back the memo recording.
7) OGM REC (Outgoing Message rec.)
c Recording the answering message in the IC.
8) OGM CHANGE
c Changing the answering message by remote control from an outside phone.
9) OGM OUT
c Playing back the answering message.
c Transmitting the answering message (by remote control, etc.).
10) OGM PLAY
c Playing back and checking the answering message.
11) ROOM MONI
c Listening to the microphone input by remote control from an outside telephone.
12) ROOM OUT
c Outputting messages, etc., over the speaker by remote control from an outside telephone.
13) VOICE SELE
c Outputting the other party’s voice over the speaker when transmitting the response message.
14) Interactive recording
c Recording an incoming message while transmitting the answering message.
No.5421-26/31