LA8518NM Datasheet, PDF (23/31 Pages) Sanyo Semicon Device – Signal Processor for Cordless Telephone Base Sets

c Power amplifier application
LA8518NM
C1 : 0.1 µF
C2 : 0.1 µF
C3 : 220 µF
C4 : 220 µF
C5 : 100 to 470 µF
SP : 8 to 16 Ω
c Voltage gain: 20 to 30 dB
c No capacitor for frequency
characteristics adjustment
connected to the feedback
resistor.
* The phase compensation capacitor C2 should be located near the IC.
* When muting (address 3F ‘‘off’’), the impedance of the power amplifier output (pin 39) is high.
No.5421-23/31