|
S6B33A2 Datasheet, PDF (5/67 Pages) Samsung semiconductor – 128 RGB Segment & 129 Common Driver For 4,096 Color STN LCD | |||
|
◁ |
S6B33A2 PRELIMINARY VER 1.3 128 RGB SEGMENT & 129 COMMON DRIVER FOR 4,096 COLOR STN LCD
INTRODUCTION
S6B33A2 is a mid-display-size-compatible driver for liquid crystal dot matrix gray-scale graphic systems. With on-
chip RC oscillator circuit, the display-timing signal is generated without being sent from MPU. Also, it is capable of
using 8bit/16bit data bus alternatively and operating with 68/80-series MPU in asynchronous. Due to the internal bit-
map display RAM of 128 Ã128 Ã12-bit, S6B33A2 is capable of operating max. 128 RGB x 128 dot LCD panels in
low-power consumption. Being the segment RGB 3-output, one pixel is 12-bit data and S6B33A2 can display 4,096
color.
FEATURES
Driver Output
â 129 COM X 128 RGB SEG
Gray Scale Function
â 4,096 color display of R: 16 gray scale, G: 16 gray scale, B: 16 gray scale
â 256 color display of R: 8 gray scale, G: 8 gray scale, B: 4 gray scale
On-chip Display Data RAM
â Capacity: 128 x 128 x 12 = 196,608 bits
Display Mode
â Normal display mode: Entire duty displaying
â Partial display mode: Partial displaying
â Standby mode: Internal display clocks off
â Area scroll mode: Particular area scrolling
Microprocessor Interface
â 8-bit/16 bit parallel bi-directional interface with 6800-series or 8080-series
â 3/4 Pin SPI (only write operation)
On-chip Low Power Analog Circuit
â On-chip RC oscillator (Internal cap. & external resistor), external clock available
â Voltage converter
â Voltage regulator
â Voltage follower
â On-chip electronic contrast control (256 steps)
â Bias ratio: 1/6
Operating Voltage Range
â VDD : 1.8 to 3.3 [V] (without Internal Regulator), 2.4 to 3.3 [V] (With internal Regulator)
â VIN1: 2.4 to 3.6 [V]
â Display operating voltage(V1): 2.0 to 3.3 V
â LCD Operating Voltage Range : 20 V
Low Power Consumption
- 650 uA Typ.
Package Type
- COG
1
|
▷ |