K4H280438F-UC Datasheet, PDF (17/23 Pages) Samsung semiconductor – 128Mb F-die DDR SDRAM Specification 66 TSOP-II with Pb-Free (RoHS compliant)

DDR SDRAM 128Mb F-die (x4, x8)
DDR SDRAM
System Characteristics for DDR SDRAM
The following specification parameters are required in systems using DDR333, DDR266 devices to ensure proper system
performance. these characteristics are for system simulation purposes and are guaranteed by design.
Table 1 : Input Slew Rate for DQ, DQS, and DM
AC CHARACTERISTICS
PARAMETER
SYMBOL
DQ/DM/DQS input slew rate measured between
VIH(DC), VIL(DC) and VIL(DC), VIH(DC)
DCSLEW
DDR333
MIN
MAX
TBD
TBD
DDR266
MIN
MAX
TBD
TBD
Units
V/ns
Notes
a, m
Table 2 : Input Setup & Hold Time Derating for Slew Rate
Input Slew Rate
tIS
tIH
Units
0.5 V/ns
0
0
ps
0.4 V/ns
+50
0
ps
0.3 V/ns
+100
0
ps
Notes
i
i
i
Table 3 : Input/Output Setup & Hold Time Derating for Slew Rate
Input Slew Rate
tDS
tDH
Units
0.5 V/ns
0
0
ps
0.4 V/ns
+75
+75
ps
0.3 V/ns
+150
+150
ps
Notes
k
k
k
Table 4 : Input/Output Setup & Hold Derating for Rise/Fall Delta Slew Rate
Delta Slew Rate
tDS
tDH
Units
Notes
+/- 0.0 V/ns
0
0
ps
j
+/- 0.25 V/ns
+50
+50
ps
j
+/- 0.5 V/ns
+100
+100
ps
j
Table 5 : Output Slew Rate Characteristice (X4, X8 Devices only)
Slew Rate Characteristic
Typical Range
(V/ns)
Minimum
(V/ns)
Maximum
(V/ns)
Pullup Slew Rate
1.2 ~ 2.5
1.0
4.5
Pulldown slew
1.2 ~ 2.5
1.0
4.5
Notes
a,c,d,f,g,h
b,c,d,f,g,h
Table 6 : Output Slew Rate Characteristice (X16 Devices only)
Slew Rate Characteristic
Typical Range
(V/ns)
Minimum
(V/ns)
Maximum
(V/ns)
Pullup Slew Rate
1.2 ~ 2.5
0.7
5.0
Pulldown slew
1.2 ~ 2.5
0.7
5.0
Notes
a,c,d,f,g,h
b,c,d,f,g,h
Table 7 : Output Slew Rate Matching Ratio Characteristics
AC CHARACTERISTICS
DDR266
PARAMETER
MIN
MAX
Output Slew Rate Matching Ratio (Pullup to Pulldown) TBD
TBD
Notes
e,m
Rev. 1.1 May. 2004