BU94605AKV Datasheet, PDF (55/84 Pages) Rohm – AAC/WMA/MP3 +SD Memory Card +CD-ROM+MP3 Record

BU94605AKV BU94607AKV BU94702AKV BU94705AKV
Datasheet
SET_NEXT
SET_REPRAND
4 0x61 0x10 0x03 N ・This command sets next tune play mode.
・Select N at the 4^th byte from the following. Any settings other than
N=0x04 will not accept the command.
N=0x00: PLAY_NEXT:
After the tune being played is completed, the LSI automatically
searches the next tune and starts playing it.
N=0x01: PLAY_ALL_STOP:
After the last tune within the memory being played is completed, the
LSI reaches the next tune and stops.
When the play command is issued again, the LSI starts playing the
next tune.
N=0x02: PLAY_FOL_STOP:
After the last tune within the folder being played is completed, the LSI
searches the next tune and stops.
When the play command is issued again, the LSI starts playing the
next tune.
N=0x03: PLAY_TUN_STOP:
After the tune being played is completed, the LSI searches the next
tune and stops.
When the play command is issued again, the LSI starts playing the
next tune.
・By default, N=0x00 is set.
・If the repeat mode is set to “repeat within folder”, operation setting
N=0x01 will become disabled. The LSI searches the next tune and
then starts playing it.
・If the repeat mode is set to “repeat one tune”, operation settings N=0x01
and 0x02 will become disabled. The LSI searches the next tune and
then starts playing it.
・If the repeat mode is set to “random within memory” or “random within
folder”, the operation settings N=0x01 and 0x02 will become disabled.
The LSI searches the next tune and then starts playing it.
・When system operation mode is PLAYLIST mode, operation in a folder
of N= 0x02 setup becomes invalid, and does not receive a command.
4 0x61 0x10 0x04 N ・This command sets repeat mode.
・Select N at the 4^th byte from the following. Any other settings will not
accept the command.
N=0x00: REPEAT_ALL: Repeats within the memory
Repeats all the tunes within the memory being played.
N=0x01: REPEAT_FOL: Repeats within the folder
Repeats the tunes within the folder being played.
N=0x02: REPEAT_TUN: Repeats one tune
Repeats the tune being played.
A setup of the repeat in the memory is followed when FF and FB
command.
N=0x03: REPEAT_TUN: Repeats one tune
Repeats the tune being played.
A setup of the repeat in the memory is followed when FF and FB
command.
N=0x04: RANDOM_ALL: Random within the memory
Plays tunes at random starting from the one being played, in a range
128 tunes ahead and back of the tune.
N=0x05: RANDOM_FOL: Random within the folder
Plays tunes at random within the folder starting from the one being
played, in a range 128 tunes ahead and back of the tune.
・By default, N=0x00 is set.
・For the settings of the REPEAT, RANDOM and SET_REPRAND
commands, the one finally set becomes enabled.
・When system operation mode is PLAYLIST mode, operation in a folder
of N= 0x01 and 0x05 setup becomes invalid, and does not receive a
command.
www.rohm.com
© 2012 ROHM Co., Ltd. All rights reserved.
TSZ22111・15・001
55/80
TSZ02201-0V2V0E600090-1-2
2012.12.10 Rev.002