BD9361GUL Datasheet, PDF (24/27 Pages) Rohm – 6ch Internal Power MOSFET System Switching Regulator + 1ch LDO

BD9361GUL
●Thermal Derating Curves
●Ordering Information
Fig.29 Power dissipation
BD9361GUL
When mounted on a glass epoxy PCB
of 50mm×50 mm×1.74 mm
Should be derated by 10.0mW/℃ at
Ta=25℃ or more.
Heat design should consider tolerance
dissipation (Pd) during actual use and
margins which should be set with
plenty of room.
-
E2
Package
GUL: VCSP50L3
Packaging and forming specification
E2: Embossed tape and reel
●Package and Marking Diagram
1PIN MARK
Lot No.
BD9361
3.14±0.05
S
0.06 S
36-φ0.25±0.05
0.05 A B
A
(φ0.15)INDEX POST
F
E
D
B
C
B
A
12 3 4 5 6
0.32±0.05
P=0.5×5
Fig.30 Package and Marking Diagram
www.rohm.com
© 2011 ROHM Co., Ltd. All rights reserved.
24
TSZ22111・14・001
TSZ02201-0Q2Q0A400010-1-2
2011.12.22 Rev.001