|
BD9361GUL Datasheet, PDF (1/27 Pages) Rohm – 6ch Internal Power MOSFET System Switching Regulator + 1ch LDO | |||
|
BD9361GUL
Datasheet
Power LSI series for Digital Camera and Digital Video Camera
6ch Internal Power MOSFET
System Switching Regulator + 1ch LDO
BD9361GUL
âOutline
6-Channel Switching Regulator Controller for Digital Camera
that contains an internal FET, and 1-Channel LDO.
It is optimal power supply composition for Digital Camera or
Digital Video Camera which carries CMOS sensor.
It contributes to mounting area reduction, because CH1ï½CH4
have built-in feedback resister and WL-CSP of compact
package is adopted.
âFeatures
1) 2.5V minimum input operating, and Supplies power for the
internal circuit by step-up converter(CH1).
2) CH1 step-up converter, CH2 cross converter, CH3,4
step-down converter CH5 step-down converter
controllable output voltage by external resister.CH6 boost
converter for LED,
3) All channels contain internal Power MOSFET and
compensation.
4) Operating frequency of 2.0 MHz (CH3,4,5) and 1.0MHz
ï¼CH1,2,6ï¼.
5) Includes Over Voltage Protection (OVP) for CH1, 2, 6.
6) Includes LDO controllable output voltage by serial
communication.
7) Contains sequence control circuit for CH1ï½3. It is
possible to select sequence CH1âCH3âCH4âCH2 and
CH1âCH4âCH3âCH2 by SEQ_CTL pin CH1, 2, 3, 4.
CH5, 6, and LDO are possible to turn ON/OFF by serial
communication.
8) Built-In discharge switch (CH2,3,4) and contains off
sequence control circuit for CH1ï½4 with inverted start-up
sequence.
9) Included cut off output voltage circuit during over current
(timer latch type).
10) Include back-gate control for CH1 with soft start function
âUse
For Digital Camera, Digital Video Camera
âFunction block diagram
Step UP
FET
DC/DC1
FET
FET
Buck-boost
FET
DC/DC2
FET
FET
Step Down
FET
DC/DC3
FET
Step Down
FET
DC/DC4
FET
Step Down
FET
DC/DC5
FET
LDO
FET
Step UP
DC/DC6
ï¼Constant
Current control)
FET
Load
switch
I2C
Interface
Motor
5.0V (typ.)
System/Analog
3.3V (typ.)
Core
1.1V (typ.)
Memory
1.8V/1.5V(typ.)
CMOS sensor/etc.
1.8V (typ.)
CMOS sensor/etc.
2.8V (typ.)
LED Back light
Fig1. Function block diagram
âpackage
WLCSP packageï¼3.14mmÃ3.14mm 0.5mm pitchï¼
âKey Specifications
ã»Input voltage accuracy :
ã»Output voltage
CH1 output voltage:
CH2 output voltage:
CH3 output voltage:
CH4 output voltage (VOSEL4=H):
CH4 output voltage (VOSEL4=L):
CH5 reference voltage:
CH6 reference voltage:
LDO output voltage:
ã»Load current
CH1 load current:
CH2 load current:
CH3 load current:
CH4 load current:
CH5 load current:
CH6 load current:
LDO load current:
ã»Frequency(CH3,4,5):
ã»Frequency (CH1,2,6):
2.5Vï½5.5V
5.0V±1.5%(typ.)
3.3V±1.5% (typ.)
1.1V±1.5% (typ.)
1.8V±1.5% (typ.)
1.5V±1.5% (typ.)
0.8V±1.25% (typ.)
0.4V±5.0% (typ.)
2.8V±1.5% (typ.)
1.0A (max)
800mA (max)
1.5A (max)
800mA (max)
500mA (max)
50mA (max)
200mA (max)
2.0MHz(typ.)
1.0MHz(typ.)
âPIN Assignments (TOP VIEW)
Fig2. PIN Assignments
âProductsï¼Silicon monolithic IC âThis product is not designed for normal operation with in a radioactive
Status of this document
The Japanese version of this document is the official specification. Please use the translation version of this document as a reference to expedite understanding of the official version.
If these are any uncertainty in translation version of this document, official version takes priority.
www.rohm.com
© 2011 ROHM Co., Ltd. All rights reserved.
1
TSZ22111ã»14ã»001
TSZ02201-0Q2Q0A400010-1-2
2011.12.22 Rev.001
|
▷ |