RF5623 Datasheet, PDF (2/18 Pages) RF Micro Devices – SINGLE 5.0V, 3.3 TO 3.8 GHZ LINEAR POWER AMPLIFIER

RF5623
Absolute Maximum Ratings
Parameter
Rating
Supply Voltage (RF Applied)
-0.5 to +5.25
Supply Voltage (No RF Applied)
-0.5 to +6.0
DC Supply Current
850
Input RF Power
+10*
Operating Ambient Temperature
-40 to +85
Storage Temperature
-40 to +150
Moisture Sensitivity
MSL1
*Note: Maximum input power with a 50 load.
Unit
V
V
mA
dBm
°C
°C
Caution! ESD sensitive device.
Exceeding any one or a combination of the Absolute Maximum Rating conditions may
cause permanent damage to the device. Extended application of Absolute Maximum
Rating conditions to the device may reduce device reliability. Specified typical perfor-
mance or functional operation of the device under Absolute Maximum Rating condi-
tions is not implied.
RoHS status based on EUDirective2002/95/EC (at time of this document revision).
The information in this publication is believed to be accurate and reliable. However, no
responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any
infringement of patents, or other rights of third parties, resulting from its use. No
license is granted by implication or otherwise under any patent or patent rights of
RFMD. RFMD reserves the right to change component circuitry, recommended appli-
cation circuitry and specifications at any time without prior notice.
Parameter
Compliance WiMAX
IEEE802.16e
Frequency Range
Output Power
EVM
Operating Current
Quiescent Current
I_REG
P_DOWN Current
Leakage Current
Gain
Gain Variation over Temperature
Low Gain Mode (Gain Reduction)
Specification
Min.
Typ.
Max.
3.3
3.6
3.6
3.8
26
2.5
3.5
600
700
380
470
10
10
1
28
32
2
25
Power Detector
Input Return Loss
Output P1dB
10
29
-15
-10
32
Turn-On Time
Thermal Data
Maximum Junction Temperature
for long term reliability, Tj Max
0.5
1.0
150
Thermal Resistance, jc
23.7
Thermal Resistance, j-Ref
29.7
Human Body Model
Charge Device Model
1000
1000
Unit
GHz
GHz
dBm
%
mA
mA
mA
mA
mA
dB
±dB
dB
dBm
dB
dBm
us
Condition
Nominal Condition T=25 °C, V_CC=5.0V,
V_REG=2.85V, Freq=Full frequency range and duty
cycle=37.029% unless otherwise specified. 802.16e
16QAM modulation with 10MHz BW signal
at P_OUT=26dBm
V_CC=5.0V, V_REG=2.85V, RF=Off
V_CC=5.0V, V_REG=0V, RF=Off
at Rated output Power
-40°C to +85°C
at V_CC=5.0V, V_REG 1 and 3=2.85V, V_REG2= Low and
Temp=25°C (In this mode the gain of the power
amplifier drops by TBD typical from its original gain)
Useable power detection range
with CW signal at V_CC=5.0V
Output stable to within 90% of final gain
°C
°C/W
°C/W
V
V
P_OUT=26dBm, V_CC=5VDc, V_REG=2.85VDc.
T_REF = 85°C
P_OUT = 26dBm, V_CC=5VDc, V_REG=2.85VDc, Junction
to bottom of QFN package. T_REF = 85°C
P_OUT=26dBm, V_CC=5VDc, V_REG=2.85VDc, Junction
to bottom of PCB. T_REF = 85°C
2 of 18
7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical
support, contact RFMD at ([phone] or [e-mail].
DS120213