M16C65_09 Datasheet, PDF (88/112 Pages) Renesas Technology Corp – RENESAS MCU

M16C/65 Group
5. Electrical Characteristics
V_CC1 = V_CC2 = 3 V
Table 5.45 Electrical Characteristics (4)
R5F3651KNFC, R5F3650KNFA, R5F3650KNFB, R5F3651KDFC, R5F3650KDFA, R5F3650KDFB,
R5F3651MNFC, R5F3650MNFA, R5F3650MNFB, R5F3651MDFC, R5F3650MDFA, R5F3650MDFB,
R5F3651NNFC, R5F3650NNFA, R5F3650NNFB, R5F3651NDFC, R5F3650NDFA, R5F3650NDFB
V_CC1 = V_CC2 = 2.7 to 3.3 V, V_SS = 0 V at T_opr = −20 to 85°C/−40 to 85°C, f_(BCLK) = 32 MHz unless otherwise
specified.
Symbol
Parameter
Measuring Condition
R_fXCIN
I_CC
Feedback resistance
XCIN
Power supply current High-speed mode
In single-chip, mode,
the output pin are
open and other pins
are V_SS
40 MHz on-chip
oscillator mode
125 kHz on-chip
oscillator mode
Low-power mode
Wait mode
Stop mode
During flash
memory program
During flash
memory erase
f_(BCLK) = 32 MHz
XIN = 4 MHz (square wave),
PLL multiplied by 8
125 kHz on-chip oscillator stop
f_(BCLK) = 32 MHz, A/D conversion
XIN = 4 MHz (square wave),
PLL multiplied by 8
125 kHz on-chip oscillator stop
f_(BCLK) = 20 MHz
XIN = 20 MHz (square wave)
125 kHz on-chip oscillator stop
Main clock stop
40 MHz on-chip oscillator on, no division
125 kHz on-chip oscillator stop
Main clock stop
40 MHz on-chip oscillator stop
125 kHz on-chip oscillator on, no division
FMR22 = 1 (slow read mode)
f_(BCLK) = 32 MHz
In low-power mode,
FMR 22 = FMR23 = 1
on flash memory ⁽¹⁾
f_(BCLK) = 32 MHz
In low-power mode,
on RAN ⁽¹⁾
Main clock stop
40 MHz on-chip oscillator stop
125 kHz on-chip oscillator on
Peripheral clock operating
T_opr = 25°C
f_(BCLK) = 32 MHz (oscillation capacity High)
40 MHz on-chip oscillator stop
125 kHz on-chip oscillator stop
Peripheral clock operating
T_opr = 25°C
f_(BCLK) = 32kHz (oscillation capacity Low)
40 MHz on-chip oscillator stop
125 kHz on-chip oscillator stop
Peripheral clock operating
T_opr = 25°C
Main clock stop
40 MHz on-chip oscillator stop
125 kHz on-chip oscillator stop
Peripheral clock stop
T_opr = 25°C
f_(BCLK) = 10 MHz, PM17 = 1 (one wait)
V_CC1 = 5.0 V
f_(BCLK) = 10 MHz, PM17 = 1 (one wait)
V_CC1 = 5.0 V
Standard
Unit
Min. Typ. Max.
16
MΩ
26.0
mA
27.0
mA
17.0
mA
18.0
mA
500.0
μA
170.0
μA
40.0
μA
20.0
μA
8.0
μA
4.0
μA
1.6
μA
20.0
mA
30.0
mA
Note:
1. This indicates the memory in which the program to be executed exists.
REJ03B0257-0110 Rev.1.10 Sep 24, 2009
Page 88 of 109