M16C65_09 Datasheet, PDF (85/112 Pages) Renesas Technology Corp – RENESAS MCU

M16C/65 Group
5. Electrical Characteristics
5.3 Electrical Characteristics (V_CC1 = V_CC2 = 3 V)
5.3.1 Electrical Characteristics
V_CC1 = V_CC2 = 3 V
Table 5.42 Electrical Characteristics (1) ⁽¹⁾
V_CC1 = V_CC2 = 2.7 to 3.3 V, V_SS = 0 V at T_opr = -20 to 85°C/-40 to 85°C, f_(BCLK) = 32 MHz unless otherwise
specified.
Symbol
V_OH High
output
voltage
Parameter
P6_0 to P6_7, P7_2 to P7_7,
P8_0 to P8_4, P8_6, P8_7,
P9_0 to P9_7, P10_0 to P10_7,
P11_0 to P11_7, P14_0, P14_1
Measuring Condition
Standard
Min. Typ.
I_OH = −1 mA
V_CC1 − 0.5
Unit
Max.
V_CC1 V
P0_0 to P0_7, P1_0 to P1_7,
P2_0 to P2_7, P3_0 to P3_7,
P4_0 to P4_7, P5_0 to P5_7,
P12_0 to P12_7, P13_0 to P13_7
I_OH = −1 mA
V_CC2 − 0.5
V_CC2
V_OH High output voltage XOUT
HIGHPOWER I_OH = −0.1 mA
V_CC1 − 0.5
V_CC1 V
LOWPOWER I_OH = −50 μA
V_CC1 − 0.5
V_CC1
High output voltage XCOUT
HIGHPOWER With no load applied
2.6
V
LOWPOWER With no load applied
V_OL Low output P6_0 to P6_7, P7_0 to P7_7,
voltage P8_0 to P8_7, P9_0 to P9_7,
P10_0 to P10_7, P11_0 to P11_7,
P14_0, P14_1
I_OL = 1 mA
2.2
0.5 V
P0_0 to P0_7, P1_0 to P1_7,
I_OL = 1 mA
0.5
P2_0 to P2_7, P3_0 to P3_7,
P4_0 to P4_7, P5_0 to P5_7,
P12_0 to P12_7, P13_0 to P13_7
V_OL Low output voltage XOUT
HIGHPOWER I_OL = 0.1 mA
LOWPOWER I_OL = 50 μA
Low output voltage XCOUT
HIGHPOWER With no load applied
LOWPOWER With no load applied
V_T+-V_T- Hysteresis HOLD, RDY, TA0IN to TA4IN,
0.2
TB0IN to TB5IN, INT0 to INT7, NMI,
ADTRG, CTS0 to CTS2, CTS5 to CTS7,
SCL0 to SCL2, SCL5 to SCL7,
SDA0 to SDA2, SDA5 to SDA7,
CLK0 to CLK7, TA0OUT to TA4OUT,
KI0 to KI3, RXD0 to RXD2,
RXD5 to RXD7, SIN3, SIN4, SD, PMC0,
PMC1, SCLMM, SDAMM, CEC
V_T+-V_T- Hysteresis RESET
0.2
I_IH
High input P0_0 to P0_7, P1_0 to P1_7,
current P2_0 to P2_7, P3_0 to P3_7,
P4_0 to P4_7, P5_0 to P5_7,
P6_0 to P6_7, P7_0 to P7_7,
P8_0 to P8_7, P9_0 to P9_7,
P10_0 to P10_7, P11_0 to P11_7,
P12_0 to P12_7, P13_0 to P13_7,
P14_0, P14_1
XIN, RESET, CNVSS, BYTE
V_I = 3 V
0.5 V
0.5
0
V
0
1.0 V
1.8 V
4.0 μA
Note:
1. When V_CC1 ≠ V_CC2, refer to 5 V or 3 V standard depending on the voltage.
REJ03B0257-0110 Rev.1.10 Sep 24, 2009
Page 85 of 109