M16C_11 Datasheet, PDF (87/112 Pages) Renesas Technology Corp – televisions, household appliances, office equipment, communication devices

M16C/65C Group
5. Electrical Characteristics
V_CC1 = V_CC2 = 3 V
Table 5.43 Electrical Characteristics (3) (1/2)
R5F3651ECNFC, R5F3651KCNFC, R5F3650KCNFA, R5F3650KCNFB, R5F3651MCNFC, R5F3650MCNFA,
R5F3650MCNFB, R5F3651NCNFC, R5F3650NCNFA, R5F3650NCNFB,
R5F3651ECDFC, R5F3651KCDFC, R5F3650KCDFA, R5F3650KCDFB, R5F3651MCDFC, R5F3650MCDFA,
R5F3650MCDFB, R5F3651NCDFC, R5F3650NCDFA, R5F3650NCDFB
V_CC1 = V_CC2 = 2.7 to 3.3 V, V_SS = 0 V at T_opr = −20°C to 85°C/−40°C to 85°C, f_(BCLK) = 32 MHz unless otherwise specified.
Symbol
Parameter
Measuring Condition
Standard
Unit
Min. Typ. Max.
R_fXCIN Feedback resistance
XCIN
16
MΩ
I_CC
Power supply current High-speed mode f_(BCLK) = 32 MHz
In single-chip, mode,
XIN = 4 MHz (square wave),
PLL multiplied by 8
the output pin are
125 kHz on-chip oscillator stopped
open and other pins
are V_SS
26.0
mA
40 MHz on-chip
oscillator mode
125 kHz on-chip
oscillator mode
Low-power mode
Wait mode
f_(BCLK) = 32 MHz, A/D conversion
XIN = 4 MHz (square wave),
PLL multiplied by 8
125 kHz on-chip oscillator stopped
f_(BCLK) = 20 MHz
XIN = 20 MHz (square wave)
125 kHz on-chip oscillator stopped
Main clock stopped
40 MHz on-chip oscillator on, no division
125 kHz on-chip oscillator stopped
Main clock stopped
40 MHz on-chip oscillator stopped
125 kHz on-chip oscillator on, no division
FMR22 = 1 (slow read mode)
f_(BCLK) = 32 MHz
In low-power mode, FMR 22 = FMR23 = 1
on flash memory ⁽¹⁾
f_(BCLK) = 32 MHz
In low-power mode,
on RAM ⁽¹⁾
Main clock stopped
40 MHz on-chip oscillator stopped
125 kHz on-chip oscillator on
Peripheral clock operating
T_opr = 25°C
f_(BCLK) = 32 MHz (oscillation capacity High)
40 MHz on-chip oscillator stopped
125 kHz on-chip oscillator stopped
Peripheral clock operating
T_opr = 25°C
f_(BCLK) = 32kHz (oscillation capacity Low)
40 MHz on-chip oscillator stopped
125 kHz on-chip oscillator stopped
Peripheral clock operating
T_opr = 25°C
XIN = 6 MHz
40 MHz on-chip oscillator stopped
125 kHz on-chip oscillator stopped
Peripheral clock f1 provision disabled except
timers (PCKSTP1A = 1)
Main clock as a timer clock source
(PCKSTP11 = 0, PCKSTP17 = 1)
A given timer operating
Note:
1. This indicates the memory in which the program to be executed exists.
27.0
mA
17.0
mA
18.0
mA
500.0
μA
170.0
μA
40.0
μA
20.0
μA
8.0
μA
4.0
μA
0.5
mA
R01DS0015EJ0100 Rev.1.00
Feb 07, 2011
Page 87 of 109