M16C_11 Datasheet, PDF (86/112 Pages) Renesas Technology Corp – televisions, household appliances, office equipment, communication devices

M16C/65C Group
5. Electrical Characteristics
V_CC1 = V_CC2 = 3 V
Table 5.42 Electrical Characteristics (2)
R5F36506CNFA, R5F36506CNFB, R5F36506CDFA, R5F36506CDFB, R5F3650ECNFA, R5F3650ECNFB,
R5F3650ECDFA, R5F3650ECDFB
V_CC1 = V_CC2 = 2.7 to 3.3 V, V_SS = 0 V at T_opr = −20°C to 85°C/−40°C to 85°C, f_(BCLK) = 32 MHz unless otherwise specified.
Symbol
Parameter
Measuring Condition
R_fXCIN Feedback resistance
XCIN
I_CC
Power supply current High-speed mode f_(BCLK) = 32 MHz
In single-chip, mode,
the output pin are
open and other pins
are V_SS
XIN = 4 MHz (square wave), PLL multiplied by 8
125 kHz on-chip oscillator stopped
f_(BCLK) = 32 MHz, A/D conversion
XIN = 4 MHz (square wave), PLL multiplied by 8
125 kHz on-chip oscillator stopped
f_(BCLK) = 20 MHz
XIN = 20 MHz (square wave)
125 kHz on-chip oscillator stopped
40 MHz on-chip Main clock stopped
oscillator mode 40 MHz on-chip oscillator on, no division
125 kHz on-chip oscillator stopped
125 kHz on-chip Main clock stopped
oscillator mode 40 MHz on-chip oscillator stopped
125 kHz on-chip oscillator on, no division
FMR22 = 1 (slow read mode)
Low-power mode f_(BCLK) = 32 MHz
In low-power mode
FMR 22 = FMR23 = 1
On flash memory ⁽¹⁾
f_(BCLK) = 32 MHz
In low-power mode
On RAM ⁽¹⁾
Wait mode
Main clock stopped
40 MHz on-chip oscillator stopped
125 kHz on-chip oscillator on
Peripheral clock operating
T_opr = 25°C
f_(BCLK) = 32 MHz (oscillation capacity High)
40 MHz on-chip oscillator stopped
125 kHz on-chip oscillator stopped
Peripheral clock operating
T_opr = 25°C
f_(BCLK) = 32 kHz (oscillation capacity Low)
40 MHz on-chip oscillator stopped
125 kHz on-chip oscillator stopped
Peripheral clock operating
T_opr = 25°C
XIN = 6 MHz
40 MHz on-chip oscillator stopped
125 kHz on-chip oscillator stopped
Peripheral clock f1 provision disabled except
timers (PCKSTP1A = 1)
Main clock as a timer clock source
(PCKSTP11 = 0, PCKSTP17 = 1)
A given timer operating
Stop mode
Main clock stopped
40 MHz on-chip oscillator stopped
125 kHz on-chip oscillator stopped
Peripheral clock stopped
T_opr = 25°C
During flash
f_(BCLK) = 10 MHz, PM17 = 1 (one wait)
memory program _{VCC1 = 3.0 V}
During flash
memory erase
f_(BCLK) = 10 MHz, PM17 = 1 (one wait)
V_CC1 = 3.0 V
Note:
1. This indicates the memory in which the program to be executed exists.
Standard
Min. Typ. Max.
Unit
16
MΩ
24.0
mA
24.7
mA
16.0
mA
17.0
mA
450.0
μA
160.0
μA
40.0
μA
20.0
μA
8.0
μA
4.0
μA
0.5
mA
1.6
μA
20.0
mA
30.0
mA
R01DS0015EJ0100 Rev.1.00
Feb 07, 2011
Page 86 of 109