PD17012GF-058_15 Datasheet, PDF (70/94 Pages) Renesas Technology Corp – PLL FREQUENCY SYNTHESIZER AND CONTROLLER FOR FM/MW/LW TUNER (AUTOMOBILE APPLICATION)

µPD17012GF-058
5.6 Description of Display
Display
ALARM
ARMING
EXIT
ENTRY
RESET
CLASSIC
NORMAL
POP
ROCK
ST
LOC
LOUD
MTL
RDMONI
MONO
Description
Indicates the state of the alarm operation.
• ALARM : This indication is on in alarm mode.
• ARMING : This indication is on during alarm output.
• EXIT : This indication is on during exit time setting.
• ENTRY : This indication is on during entry time setting.
• RESET : This indication is on during reset time setting.
Indicates the mode for the external sound control IC.
• CLASSIC : Classic mode
• NORMAL : Normal mode
• POP : Pops mode
• ROCK : Rock mode
Indicates that a stereo broadcast is currently received.
(1) In CD mode or tape mode
This indication is off.
(2) In other modes
This indication is on when the FM or MW band is selected, the ST switch is on in the station reception
state, and the MONO-off state is set. (For the MW band, this indication is on only when the initial setting
diode MWS = 1, and the stereo reception function is enabled.)
This indication is off during tuning operation regardless of which band is selected.
Indicates that the local state is set.
(1) In CD mode and tape mode
This indication is off.
(2) In other modes
This indication is on in the local state.
Indicates that the loudness-on state is set.
This indication is on in the loudness-on state, regardless of which mode is set.
Indicates that the METAL-on state is set.
(1) In tape mode and radio-monitor tape mode
This indication is on in the METAL-on state.
(2) In other modes
This indication is off.
Indicates that the radio-monitor state is set.
Indicates that the MONO state is set.
(1) In CD mode and tape mode
This indication is off.
(2) In other modes
This indication is on when the FM or MW band is selected in the MONO-off state. (For the MW band,
this indication is on only when the initial setting diode MWS = 1, and the stereo reception function is
enabled.)
Indicates a tape running direction.
(1) In tape mode and radio-monitor tape mode
A tape running direction is displayed according to the state of the RL switch. A tape running direction
blinks when the FF switch is on.
(2) In other modes
This indication is off.
68