PD17012GF-058_15 Datasheet, PDF (27/94 Pages) Renesas Technology Corp – PLL FREQUENCY SYNTHESIZER AND CONTROLLER FOR FM/MW/LW TUNER (AUTOMOBILE APPLICATION)

µPD17012GF-058
Initial setting
diode
PRIO1
PRIO2
Description
Privileged
PRIO1 PRIO2
display
Description
1
0 Frequency In 5 seconds after the DISP key is pressed to shift from the
frequency, “ ”, or “ ” display to the clock display, the previous
display is resumed if no other key is pressed.
In radio mode
Usually the frequency display appears and remains. Pressing
the DISP key causes the clock display to appear for 5
seconds.
Pressing the DISP key or a preset number key within this 5-
second period of the clock display resumes the frequency
display.
In tape mode
Usually the “ ” display appears and remains. Pressing the
DISP key causes the clock display to appear for 5 seconds.
Pressing the DISP key again within this 5-second period of
clock display resumes the “ ” display.
In CD mode
Usually the “ ” display appears and remains. Pressing the
DISP key causes the clock display to appear for 5 seconds.
Pressing the DISP key again within this 5-second period of
the clock display resumes the “ ” display.
In radio-monitor tape mode
Usually the “ ” display appears and remains. Pressing the
DISP key causes the frequency display to appear for 5
seconds.
Pressing the DISP key again within this 5-second period of
the frequency display causes the clock display to appear.
Pressing the DISP key again within this 5-second period of
the clock display causes the “ ” display to appear.
Pressing a preset number key during “ ” or clock display
causes the frequency display to appear for 5 seconds.
In radio-monitor CD mode
Usually the “ ” display appears and remains. Pressing the
DISP key causes the frequency display to appear for 5
seconds.
Pressing the DISP key again within this 5-second period of
the frequency display causes the clock display to appear.
Pressing the DISP key again within this 5-second period of
the clock display causes the “ ” display to appear.
Pressing a preset number key during “ ” or clock display
causes the frequency display to appear for 5 seconds.
(1: Shorted by the diode; 0: Open)
25