H83024 Datasheet, PDF (390/841 Pages) Renesas Technology Corp – Renesas 16-Bit Single-Chip Microcomputer H8 Family/H8/300H Series

Section 12 Serial Communication Interface
There is a single serial data communication format.
 Data length:
8 bits
 Receive error detection: overrun errors
• Full-duplex communication
The transmitting and receiving sections are independent, so the SCI can transmit and receive
simultaneously. The transmitting and receiving sections are both double-buffered, so serial
data can be transmitted and received continuously.
• The following settings can be made for the serial data to be transferred:
 LSB-first or MSB-first transfer
 Inversion of data logic level
• Built-in baud rate generator with selectable bit rates
• Selectable transmit/receive clock sources: internal clock from baud rate generator, or external
clock from the SCK pin
• Four types of interrupts
Transmit-data-empty, transmit-end, receive-data-full, and receive-error interrupts are requested
independently.
Features of the smart card interface are listed below.
• Asynchronous communication
 Data length: 8 bits
 Parity bits generated and checked
 Error signal output in receive mode (parity error)
 Error signal detect and automatic data retransmit in transmit mode
 Supports both direct convention and inverse convention
• Built-in baud rate generator with selectable bit rates
• Three types of interrupts
Transmit-data-empty, receive-data-full, and transmit/receive-error interrupts are requested
independently.
Rev. 2.00 Sep 20, 2005 page 352 of 800
REJ09B0260-0200