M32C88 Datasheet, PDF (389/461 Pages) Renesas Technology Corp – RENESAS 16/32-BIT SINGLE-CHIP MICROCOMPUTER M16C FAMILY / M32C/80 SERIES

M32C/88 Group (M32C/88T)
23. Programmable I/O Ports
Table 23.2 Port P6 Peripheral Function Output Control
Bit 0
Bit 1
PS0 Register
_________ _______
0: P60/CTS0/SS0
1: Selected by the PSL0 register
________________
0: P61/CLK0(input)/CAN2IN/CAN2WU
1: CLK0(output)
Bit 2 0: P62/RxD0/SCL0(input)
1: Selected by the PSL0 register
Bit 3
Bit 4
0: P63/SRxD0/SDA0(input)
1: TxD0/SDA0 (output)
_________ _______
0: P64/CTS1/SS1
1: Selected by the PSL0 register
Bit 5 0: P65/CLK1(input)
1: CLK1(output)
Bit 6 0: P66/RxD1/SCL1(input)
1: Selected by the PSL0 register
Bit 7 0: P67/SRxD1/SDA1(input)
1: TxD1/SDA1(output)
PSL0 Register
_________
0: RTS0
1: CAN2OUT
Set to "0"
0: SCL0(output)
1: STxD0
Set to "0"
________
0: RTS1
1: Do not set this value
Set to "0"
0: SCL1(output)
1: STxD1
Set to "0"
Table 23.3 Port P7 Peripheral Function Output Control
PS1 Register
PSL1 Register
PSC Register⁽¹⁾
Bit 0 0: P70/TA0OUT(input)/SRxD2 0: Selected by the PSC register 0: TxD2/SDA2(output)
INPC16/SDA2 (input)
PSD1 Register
0: Do not set to this value
1: Selected by the PSL1 register 1: TA0OUT(output)
1: Selected by the PSD1 register 1: OUTC16
Bit 1 0: P71/TB5IN/TA0IN/RxD2/ 0: Selected by the PSC register 0: SCL2(output)
0: Do not set to this value
INPC17/SCL2 (input)
1: Selected by the PSL1 register 1: STxD2
1: Selected by the PSD1 register 1: OUTC17
Bit 2
Bit 3
Bit 4
Bit 5
0: P72/TA1OUT(input)/
0: Selected by the PSC register 0: CLK2(output)
CLK2(input)
1: Selected by the PSL1 register 1: TA1OUT(output)
1: V
_________ ______
_________
0: P73/TA1IN/CTS2/SS2/ 0: Selected by the PSC register 0: RTS2
INPC10
__
1: Selected by the PSL1 register 1: V
1: OUTC10/ISTxD1/BE1OUT
0: P74/INPC11/ISCLK1(input)/ 0: Selected by the PSC register 0: TA2OUT(output)
TA2OUT(input)
1: Selected by the PSL1 register 1: W
0: P75/TA2IN/INPC12/
___
0: W
1: OUTC11/ISCLK1(output)
Set to "0"
ISRxD1/BE1IN
1: Selected by the PSL1 register 1: OUTC12
Set to "0"
Set to "0"
Set to "0"
Set to "0"
Bit 6 0: P76/INPC13/TA3OUT(input) 0: Selected by the PSC register 0: Selected by the PSD1 register 0: ISTxD0
1: Selected by the PSL1 register 1: TA3OUT(output)
Bit 7 0: P77/TA3IN/CAN0IN/
0: ISCLK0(output)
1: CAN0OUT
1: OUTC13
_____
_____
0: P104 to P107 or KI0 to KI3 Set to "0"
ISCLK0(input)/INPC14
1: Selected by the PSL1 register 1: OUTC14
1: AN4 to AN7
(No relation to P77)
NOTE:
1. When setting the PSL1_i bit (i=0 to 4, 6) to "1", set the corresponding PSC_i bit to "0".
Rev. 1.10 Oct. 18, 2005 ^{Page 366} of 435
REJ09B0162-0110