HD64F2134ATF20 Datasheet, PDF (35/39 Pages) Renesas Technology Corp – E6000 Emulator HS2148EPI61H Supplementary Information

It will take about 11 minutes to execute the test program when the host computer using
Windows^®95 runs at 166 MHz and the PCMCIA interface card is used. The following messages
are displayed during the test.
Message
Description
E6000 H8S/2148 EMULATION BOARD Tests Vx.x
Hitachi Ltd (1999)
Test program start
message. Vx.x shows
the version number.
SIMM module fitted? (1.None 2.1MB 3. 4MB) 1
Enter 1 because the
SIMM memory module is
not installed in this
example.
Searching for interface card ........OK, card at H'd0000
Shows that the PC
interface board is
correctly installed in
the host computer, and
displays the address
when the ISA bus interface is
installed.
The displayed address
depends on the
settings. When the PCI
interface board or PCMCIA
interface card is installed,
the address is not displayed.
Checking emulator is connected ......OK
Shows that the E6000 is
correctly connected to
the host computer.
Emulator Board Information:
Main Board ID
H'5
Shows the ID number of
the lower board of the
E6000 (always 5).
Emulation Board ID H'e
Shows the ID number of
the upper board of the
E6000 (always e).
Revision
H'x
Shows the revision number
of the upper board of the
E6000.
&