HD64F2134ATF20 Datasheet, PDF (25/39 Pages) Renesas Technology Corp – E6000 Emulator HS2148EPI61H Supplementary Information

Default:
Figure 2.1 Default User System Interface Circuit
Mode Pins (MD1 and MD0) and NMI: The NMI signal is input to the MCU through the
emulator control circuit. The rising/falling time of these signals must be 8 ns/V or less. The mode
pins are only monitored. The CPU mode depends on the HDI settings.
Figure 2.2 User System Interface Circuit for MD1, MD0, and NMI
RESET:
Figure 2.3 User System Interface Circuit for RESET
&