PD178002_15 Datasheet, PDF (34/50 Pages) Renesas Technology Corp – 8-BIT SINGLE-CHIP MICROCONTROLLERS

µPD178002, 178003
DC Characteristics (TA = –40 to +85°C, VDD = 3.5 to 5.5 V)
(3/3)
Parameter
Power supply
current^{Note 1}
Symbol
Conditions
IDD1
While the CPU is operating TCY = 0.89 µs^{Note 2}
and the PLL is stopped
IDD2
fX = 4.5 MHz operation
TCY = 0.44 µs^{Note 3}
VDD = 4.5 to 5.5 V
IDD3
While the CPU is operating TCY = 0.89 µs^{Note 2}
and the PLL is stopped
HALT Mode
IDD4
Pin X1 sine wave
input VIN = VDD.
fX = 4.5 MHz operation
TCY = 0.44 µs^{Note 3}
VDD = 4.5 to 5.5 V
MIN. TYP. MAX. Unit
2.5
15
mA
4.0
27
mA
0.7
1.5
mA
1.0
2.0
mA
Data retention
VDDR1
power supply voltage _VDDR2
VDDR3
Data retention
IDDR1
power supply current _IDDR2
When the crystal oscillation TCY = 0.44 µs
is operating
TCY = 0.89 µs
When the crystal oscillation is stopped
When power off by power on clear is detected
When the crystal oscillation TA = 25°C, VDD = 5 V
is stopped
4.5
5.5
V
3.5
5.5
V
2.6
5.5
V
2
4
µA
2
30
µA
Notes 1. The current flowing to the ports is not included.
2. When the processor clock control register (PCC) is set to 00H, and the oscillation mode select register
(OSMS) is set to 00H.
3. When PCC is set to 00H and OSMS is set to 01H.
Remarks 1. TCY: Cycle time (minimum instruction execution time)
2. fX: System clock oscillation frequency.
Reference Characteristics (TA = 25°C, VDD = 5 V)
(2/2)
Parameter
Power supply
current
Symbol
IDD5
Conditions
During CPU operation
TCY = 0.44 µs^Note
and PLL operation.
VCOH pin sine wave
input
fIN = 130 MHz,
VIN = 0.15 Vp-p
MIN. TYP. MAX. Unit
7
mA
Note When the processor clock control register (PCC) is set to 00H, and the oscillation mode select register
(OSMS) is set to 01H.
Remark TCY: Cycle time (minimum instruction execution time)
32
Data Sheet U12628EJ3V0DS00