|
PD178002_15 Datasheet, PDF (31/50 Pages) Renesas Technology Corp – 8-BIT SINGLE-CHIP MICROCONTROLLERS | |||
|
◁ |
µPD178002, 178003
10. ELECTRICAL SPECIFICATIONS
Absolute Maximum Ratings (TA = 25°C)
Parameter
Symbol
Conditions
Ratings
Unit
Supply voltage
VDD
â0.3 to +7.0
V
Input voltage
VI
â0.3 to VDD + 0.3
V
Output voltage
VO
â0.3 to VDD + 0.3
V
Output withstand
voltage
VBDS P132 to P134 N-ch open drain
â0.3 to VDD + 0.3
V
Analog input voltage VAN
P10 to P12
Analog input pin
â0.3 to VDD + 0.3
V
Output current, high IOH
Per pin
â10
mA
Total for P01 to P06, P30 to P37, P56, P57,
P60 to P67, P120 to P125
â15
mA
Total for P10 to P15, P20 to P27, P40 to P47, P50 to
P55, P132 to P134
â15
mA
Output current, low IOLNote Per pin
Peak value
15
mA
rms value
7.5
mA
Operating ambient TA
temperature
â40 to +85
°C
Storage temperature Tstg
â65 to +150
°C
Note The rms value should be calculated as follows: [rms value] = [Peak value] Ã âDuty
Caution Product quality may suffer if the absolute maximum rating is exceeded even momentarily for any
parameter. That is, the absolute maximum ratings are rated values at which the product is on the
verge of suffering physical damage, and therefore the product must be used under conditions that
ensure that the absolute maximum ratings are not exceeded.
Remark Unless specified otherwise, the characteristics of alternate-function pins are the same as those of port
pins.
Recommended Supply Voltage Ranges (TA = â40 to +85°C)
Parameter
Supply voltage
Symbol
Conditions
VDD1
VDD2
During CPU operation and PLL operation.
While the CPU is operating and the PLL is stopped.
Cycle time: TCY ⥠0.89 µs
VDD3
While the CPU is operating and the PLL is stopped.
Cycle time: TCY = 0.44 µs
Remark TCY: Cycle time (minimum instruction execution time)
MIN. TYP. MAX. Unit
4.5
5.5
V
3.5
5.5
V
4.5
5.5
V
Data Sheet U12628EJ3V0DS00
29
|
▷ |