|
HD404849 Datasheet, PDF (3/127 Pages) Hitachi Semiconductor – 4-Bit Single-Chip Microcomputer | |||
|
◁ |
HD404849 Series
4-Bit Single-Chip Microcomputer
Rev. 6.0
Sept. 1998
Description
The HD404849 series of HMCS400-series microcomputers is designed to increase program productivity
and also incorporate large-capacity memory. Each microcomputer has an LCD controller/driver, A/D
converter, input capture circuit, 32-kHz oscillator for clock use, and four low-power dissipation modes.
The HD404849 series includes the HD404848 with an 8-kword on-chip ROM, the HD4048412 with a 12-
kword on-chip ROM, the HD404849 with a 16-kword on-chip ROM, and the HD4074849 with a 16-kword
on-chip PROM.
On-chip ROM is available in a PROM (ZTAT⢠microcomputer) version and a mask ROM version. A
program can be written to the PROM by a PROM writer, which can dramatically shorten system
development periods and smooth the process from debugging to mass production. PROM programming
specifications are the same as for the 27256.
ZTATâ¢: Zero Turn Around Time ZTAT is a trademark of Hitachi Ltd.
Features
⢠35 I/O pins, including nine high-current pins (15 mA, max.), eight pins multiplexed with LCD segment
pins, and four pins multiplexed with analog input pins
⢠Four timer/counters
⢠Eight-bit input capture circuit
⢠Three timer outputs (including two PWM outputs)
⢠Two event counter inputs (including one in which the detection edge is programmable)
⢠Clock-synchronous 8-bit serial interface
⢠A/D converter (8 channels à 8 bits)
 Operation voltage 2.7 V to 6.0 V
⢠LCD driver (32 segments à 4 commons)
⢠Built-in oscillators
 Main clock: Can be driven by ceramic oscillator, crystal oscillator, or external clock.
 Subclock: 32.768-kHz crystal
⢠Ten interrupt sources
 Four by external sources, including two in which the detection edge is programmable
|
▷ |