M16C5LD_15 Datasheet, PDF (25/88 Pages) Renesas Technology Corp – RENESAS MCU

M16C/5LD Group, M16C/56D Group
4. Special Function Registers (SFRs)
Table 4.2
SFR Information (2) ⁽¹⁾
Address
0020h
0021h
0022h
0023h
0024h
0025h
0026h
0027h
0028h
0029h
Register
Voltage Monitor Function Select Register
Voltage Detector 2 Level Select Register
002Ah Voltage Monitor 0 Control Register
002Bh
002Ch
002Dh
002Eh
002Fh
0030h
0031h
0032h
0033h
0034h
0035h
0036h
0037h
0038h
0039h
003Ah
003Bh
003Ch
003Dh
003Eh
003Fh
Voltage Monitor 2 Control Register
Symbol
Reset Value
VWCE
VD2LS
VW0C
VW2C
00h
0000 0100b⁽²⁾
1100 1X10b ^{(3, 4)}
1100 1X11b^{(3, 5)}
1000 0X10b^{(3, 6)}
X: Undefined
Notes:
1. The blank areas are reserved. No access is allowed.
2. Hardware reset, power-on reset, voltage monitor 0 reset, or voltage monitor 2 reset.
3. Software reset, watchdog timer reset, oscillator stop detect reset, voltage monitor 0 reset, and voltage monitor 2 reset
do not affect the following registers or bit: the VW0C register, and bits VW2C2 and VW2C3 in the VW2C register.
4. This is the reset value when the LVDAS bit of the OFS1 address is 1 during hardware reset
5. This is the reset value after voltage monitor 0 reset, power-on reset, or when the LVDAS bit of the OFS1 address is 0
during hardware reset.
6. This is the reset value after hardware reset, power-on reset, or voltage monitor 0 reset
R01DS0132EJ0120 Rev.1.20
Nov 25, 2011
Page 25 of 84