M16C5M Datasheet, PDF(24/159 Page) Renesas Technology Corp

English

English German Russian Spanish Italian Polish Chinese Japanese Korean French Portuguese	Language :

M16C5M Datasheet, PDF (24/159 Pages) Renesas Technology Corp – RENESAS MCU

◁

M16C/5M Group, M16C/57 Group

1. Overview

1.6 Pin Functions

Table 1.17 Pin Functions (64-Pin, 80-Pin, and 100-Pin Packages)

Signal Name

Pin Name

I/O

Description

Power supply

Analog power

supply

Reset input

VCC, VSS

AVCC,

AVSS

RESET

I Apply 3.0 V to 5.5 V to the VCC pin and 0 V to the VSS pin.

Power supply for the A/D converter and D/A converter. Pins

I AVCC and AVSS should be connected to VCC and VSS,

respectively.

I Driving this pin low resets the MCU.

CNVSS

I Connect to VSS via a resistor.

Main clock input XIN

Main clock output XOUT

Sub clock input

Sub clock output

XCIN

XCOUT

Input/output for the main clock oscillator. Connect a ceramic

resonator or crystal oscillator between XIN and XOUT. (1)

To apply an external clock, connect it to XIN and leave XOUT

O open. When XIN is not used, connect XIN to VCC pin and leave

XOUT open.

I Input/output for the sub clock oscillator. Connect a crystal

O oscillator between XCIN and XCOUT. (1)

Clock output

CLKOUT

INT interrupt input

NMI input

Key input interrupt

INT0 to INT5

NMI

KI0 to KI3

This pin outputs the clock having the same frequency as f1, f8,

f32, or fC.

I Input for INT interrupt

I Input for NMI

I Input for the key input interrupt

Timer A

TA0OUT to

TA4OUT

TA0IN to TA4IN

I/O Timers A0 to A4 input/output

I Timers A0 to A4 input

I Input for Z-phase

Timer B

Three-phase motor

control timer

TB0IN to TB2IN

U,U,V,V,W,W

IDU, IDW, IDV, SD

I Timers B0 to B2 input

O Output for three-phase motor control timer

I Input for three-phase motor control timer

Real-time clock

Serial interface

UART0 to UART3

RTCOUT

CTS0 to CTS3

RTS0 to RTS3

CLK0 to CLK3

RXD0 to RXD3

O Output for real-time clock

I Input to control data transmission

O Output to control data reception

I/O Transfer clock input/output

I Serial data input

TXD0 to TXD3

O Serial data output

UART2

I2C mode

SDA2

SCL2

I/O Serial data input/output

I/O Transfer clock input/output

Multi-master I2C

bus

SDAMM

SCLMM

Serial data input/output

I/O

Transfer clock input/output

Note:

1. Please contact the oscillator manufacturer for oscillation characteristic.

REJ03B0267-0101 Rev.1.01

Jul 23, 2010

Page 24 of 156

▷