R0E00008AKCE00EP38 Datasheet, PDF (21/35 Pages) Renesas Technology Corp – Microcomputer Development Environment System

E8a Emulator
6.3 Event Setting dialog box
The conditions in the Event condition sheet can be set.
6. E8a Emulator Functions (Supplement on the User’s Manual)
Figure 6.2 Event Setting Dialog box
(1) Event A
Set the contents of the Event A. You can set the conditions of the address comparison with mask specification and
data comparison with mask specification for the Event A.
Table 6.2 Contents of the Event A
Option
Description
Address (with mask specification)
Specify an address to detect the data access. Specify the bit number to set
the address mask. The specified lower bits of the specified address are
masked.
Data (with mask specification)
Access Size
If you compare data, specify the data and data mask. When selecting BYTE
for the Access Size, you can specify to FF. When selecting WORD for the
Access Size, you can specify to FFFF. If you do not compare data, leave the
Data item empty or enter 0 in the Mask. If you do not use the data mask,
leave the Mask item empty.
Select one from BYTE, WORD or Not specify for the Access Size. If a data
access which does not match the specified access size occurs, the event is
not encountered. When specifying WORD for the Access Size, specify the
even address for the Address item.
Access Type
Select an access type.
- R/W: READ or WRITE
- READ
- WRITE
REJ10J1739-0200 Rev.2.00 Jul. 03, 2009
Page 21 of 35