R0E00008AKCE00EP38 Datasheet, PDF (20/35 Pages) Renesas Technology Corp – Microcomputer Development Environment System

E8a Emulator
6. E8a Emulator Functions (Supplement on the User’s Manual)
6.2 Eventcondition tab of the Eventpoints window
Set the contents of the data access event, break condition and trace condition.
Double-clicking each item in this window will open the Event Setting dialog box to change the conditions. The items
displayed in the sheet are shown in Table 6.1.
Figure 6.1 Eventpoints Window (Eventcondition tab)
Table 6.1
Item
Type
State
Condition
Action
Display Contents of the Eventcondition Tab
Description
Displays the event types.
- Event A
- Event B
- Break Condition
- Trace Condition
Shows the event is enable or disable.
- Enable
- Disable
Displays the set condition.
For the Event A and Event B, the access types are displayed.
- R/W: READ or WRITE
- READ
- WRITE
For the Break Condition and Trace Condition, Break/Trace is always displayed.
REJ10J1739-0200 Rev.2.00 Jul. 03, 2009
Page 20 of 35