R0E00008AKCE00EP38 Datasheet, PDF (16/35 Pages) Renesas Technology Corp – Microcomputer Development Environment System

E8a emulator
5. Emulator Debugger Setting
(1) Selecting the Mode
Table 5.1 Selecting the Mode
Mode
Usage
Erase Flash and Connect [*2]
Keep Flash and Connect [*2]
Debugging
only [*1]
Program Flash [*2]
Simple
programmer
Debugging of CPU rewrite mode
Debugging
only [*1]
Description
When starting the debugger, the E8a emulator erases the Flash memory data for the
MCUs and simultaneously writes the E8a emulator program.
When launching the debugger, the E8a emulator retains the Flash memory data for
the MCUs. Note that the area for the E8a emulator program and the vector area used
by the E8a emulator will change.
The E8a emulator starts as a simple programmer. When downloaded, the E8a writes
only the user program (E8a emulator program is not written). Therefore, the program
cannot be debugged in this mode.
When [Execute the user program after ending the debugger.] is selected, with the
E8a emulator connected to the user system, the user program is executed at the
same time the debugger is terminated. This check box setting is available only when
the [Program Flash] mode is selected.
Select this setting when debugging the program which rewrites the CPU. In this
mode, the following debug operation which rewrites the Flash memory cannot be
executed.
- Setting the PC break points
- Changing the memory contents in the Flash memory area
In this mode, when starting the debugger, the E8a emulator erases the Flash memory
data for the MCUs and simultaneously writes the E8a emulator program.
Notes
[*1] These modes are available only for debugging. Programs written in these modes cannot be executed from the CPU.
If you want to execute a program from the CPU, use Program Flash mode.
[*2] When starting up in these modes, lock bits in all the blocks of the flash memory will be unlocked. Note that the lock
bits of the downloaded blocks will be unlocked after downloading the user program.
REJ10J1739-0200 Rev.2.00 Jul. 03, 2009
Page 16 of 35