PD16753_15 Datasheet, PDF (16/22 Pages) Renesas Technology Corp – 384-OUTPUT TFT-LCD SOURCE DRIVER (COMPATIBLE WITH 256-GRAY SCALES)

µ PD16753
Electrical Characteristics (TA = –10 to +75°C, VDD1 = 3.3 V± 0.3 V, VDD2 = 9.0 V± 0.5 V, VSS1 = VSS2 = 0 V,
Unless otherwise specified, LPC = H or Open)
Parameter
Input Leak Current
Symbol
IIL
Conditions
Except LPC
MIN.
TYP.
±0.1
MAX. Unit
±1.0
µA
5
LPC
60
µA
High-Level Output Voltage
VOH
STHR (STHL), IOH = 0 mA
VDD1 − 0.1
V
Low-Level Output Voltage
γ -Corrected Supply Resistance
Driver Output Current
VOL
STHR (STHL), IOL = 0 mA
Rγ
V0 to V7 = V8 to V15 = 4.0 V
IVOH
VX = 7.0 V, VOUT = 6.5 V ^Note
IVOL
VX = 1.0 V, VOUT = 1.5 V ^Note
0.1
V
4.4
8.9
17.8
k
−0.185
−0.09
mA
0.12
0.238
mA
Output Voltage Deviation
Output Swing Difference
Deviation
Output Swing Average
Difference Deviation
Logic Part Dynamic Current
Consumption
Driver Part Dynamic Current
Consumption
∆VO
VO = 0.2 V to 1.2 V
VO = VDD2 −1.2 V to VDD2 −0.2 V
±30
±50
mV
VO = 1.2 V to 0.5 VDD2 −0.3 V
±10
±20
mV
VO = 0.5 VDD2 to VDD2 −1.2 V
∆VP–P
VO = 0.2 V to 0.8 V
±20
±40
mV
VO = VDD2 −0.8 V to VDD2 −0.2 V
VO = 0.8 V to 1.2 V
VO = VDD2 −1.2 V to VDD2 −0.8 V
±10
±20
mV
VO = 1.2 V to 0.5 VDD2 −0.3 V
±3
±10
mV
VO = 0.5 VDD2 to VDD2 −1.2 V
AVO
VDD2 = 8.5 V, VO = 7.9 V, V3 =
4.433
4.447
V
6.22 V, V7 = 4.0 V, V8 = 4.0 V,
V12 = 1.78 V, V12 = 0.1 V, V1, V2,
V4, V5, V6, V9, V10, V11, V13, V14:
Open, TA = 25°C, Input data:
80H
IDD1
VDD1, with no load
0.8
6.0
mA
IDD2
VDD2, with no load
4.5
11.0
mA
Note VX refers to the output voltage of analog output pins S1 to S384. VOUT refers to the voltage applied to analog
output pins S1 to S384.
Cautions
1.The STB cycle is defined to be 20 µs at fCLK = 40 MHz.
2.The TYP. values refer to an all black or all white input pattern. The MAX. value refers to the
measured values in the dot checkerboard input pattern.
3.Refers to the current consumption per driver when cascades are connected under the
assumption of XGA single-sided mounting (8 units).
14
Data Sheet S15630EJ1V0DS