E1 Datasheet, PDF (14/50 Pages) Renesas Technology Corp – E1/E20 Emulator

E1/E20 Emulator
Designing the User System
2.3.2. 38-Pin Connector Specifications
Figure 2.5 shows the specifications of the 38-pin connector. Table 2.5 shows the 38-connector pin assignments
when connecting to the RX610, RX621, RX62N, RX62T, and RX62G Groups in JTAG Interface Connection.
Table 2.6 shows the 38-connector pin assignments when connecting to the RX63x and RX64x Groups in JTAG
Interface Connection.
In FINE Interface Connection, use the 38-pin to 14-pin conversion adapter included with the E20 to connect the
emulator to the 14-pin connector.
Note that with the packages of the RX610, RX621, RX62N, RX62T, and RX62G Groups which do not have a
trace pin, the function to acquire large amounts of trace data is not available. In such case, use a 14-pin connector.
37
1
6.91
38
2
25.4
Connector (top view)
Figure 2.5 Emulator Connector Specifications (38-Pin)
Unit: mm
The GND bus lead at the center of the 38-pin connector must be grounded.
R20UT0399EJ0700 Rev.7.00
Feb 01, 2014
Page 14 of 50