M66592FP Datasheet, PDF (1/127 Pages) Renesas Technology Corp – ASSP (USB2.0 Peripheral Controller)

M66592FP/WG
ASSP (USB2.0 Peripheral Controller)
1 Overview
REJ03F0111-0100Z
Rev1.00
2004.10.01
1.1 Overview
The M66592 is a USB 2.0 peripheral controller that is compliant with USB (Universal Serial Bus) specification Rev.
2.0 for both Hi-Speed and Full-Speed transfers. This controller has a built-in USB transceiver and supports all of the
transfer types defined by the USB specification. The compact package and low power consumption make it ideal for
use in mobile devices.
The M66592 has a 5 kB built-in buffer memory for data transfers and enables use of up to eight pipes. For pipes 1 to
7, any end point numbers can be assigned, based on the user’s system. The M66592 can be connected to the CPU using
either a separate bus or a multiplex bus. Moreover, a split bus interface (dedicated DMA interface) is provided
independent of the CPU bus interface, making this an ideal choice for systems that require transfer of large volumes
of data at high speed.
1.2 Features
1.2.1 USB Rev. 2.0 Hi-Speed supported
♦ Compliant with USB specification Rev. 2.0
♦ Both Hi-Speed transfer(480 Mbps)and Full-Speed transfer (12 Mbps) are supported
♦ Built-in Hi-Speed / Full-Speed USB transceiver
♦ Can be operated as a Hi-Speed / Full-Speed peripheral controller
1.2.2 Reduced power consumption
♦ 1.5 V core power supply
♦ Low power consumption makes this ideal for mobile devices
♦ Low-power mode (power-saving sleep state) supported to reduce power consumption during suspended operation
1.2.3 Space-saving installation supported
♦ Few external elements are used, so less space is required for mounting
• VBUS signal can be connected directly to the controller pin
• Built-in D+ pull-up resistor
• Built-in D+ and D- terminating resistors (for Hi-Speed operation)
• Built-in D+ and D- output resistors (for Full-Speed operation)
♦ Compact 64-pin package used
1.2.4 Isochronous transfer supported
♦ All types of USB transfers supported
• Control transfers
• Bulk transfers
• Interrupt transfers (High-Bandwidth transfers are not supported)
• Isochronous transfers (High-Bandwidth transfers are not supported)
Rev1.00 2004.10.01 page 1 of 125