HYS72T64000HP-25F Datasheet, PDF (3/65 Pages) Qimonda AG – 240-Pin Registered DDR2 SDRAM Modules

Internet Data Sheet
1
Overview
HYS72T[64/128/256]xxxHP–[25F/2.5/3/3S/3.7]–B
240-Pin Registered DDR2 SDRAM
This chapter gives an overview of the 1.8 V 240-Pin Registered DDR2 SDRAM Modules with parity bit product family and
describes its main characteristics.
1.1
Features
• 240-Pin PC2–6400, PC2–5300 and PC2–4200 DDR2
SDRAM memory modules.
• One rank 64M ×72, 128M ×72, and two ranks 128M ×72,
256M ×72 module organization, and 512M ×8, 512M ×4
chip organization
• Registered DIMM Parity bit for address and control bus
• 512 MB, 1 GB, and 2 GB module built with 512 Mbit DDR2
SDRAMs in P-TFBGA-60 chipsize packages.
• Standard Double-Data-Rate-Two Synchronous DRAMs
(DDR2 SDRAM) with a single + 1.8 V (± 0.1 V) power
supply
• Programmable CAS Latencies (3, 4, 5, 6), Burst Length
(4 & 8) and Burst Type
• Auto Refresh (CBR) and Self Refresh
• Programmable self refresh rate via EMRS2 setting
• Programmable partial array refresh via EMRS2 settings
• DCC enabling via EMRS2 setting
• All inputs and outputs SSTL_18 compatible
• Off-Chip Driver Impedance Adjustment (OCD) and On-Die
Termination (ODT)
• Serial Presence Detect with E²PROM
• RDIMM Dimensions (nominal): 30 mm high, 133.35 mm
wide
• Based on standard reference card layouts Raw Card “F”,
“G“, “H“, ”J” and “L“
• All speed grades faster than DDR2–400 comply with
DDR2–400 timing specifications.
• RoHS compliant products¹⁾
Product Type Speed Code
–2.5F
Speed Grade
Max. Clock Frequency @CL6
@CL5
@CL4
@CL3
Min. RAS-CAS-Delay
Min. Row Precharge Time
Min. Row Active Time
Min. Row Cycle Time
PC2–6400
5–5–5
f_CK6
f_CK5
f_CK4
f_CK3
t_RCD
t_RP
t_RAS
t_RC
400
400
266
200
12.5
12.5
45
57.5
–2.5
PC2–6400
6–6–6
400
333
266
200
15
15
45
60
–3
PC2–5300
4–4–4
—
333
333
200
12
12
45
57
TABLE 1
Performance Table
–3S
–3.7
Unit
PC2–5300
5–5–5
—
333
266
200
15
15
45
60
PC2–4200
4–4–4
—
266
266
200
15
15
45
60
—
MHz
MHz
MHz
MHz
ns
ns
ns
ns
1) RoHS Compliant Product: Restriction of the use of certain hazardous substances (RoHS) in electrical and electronic equipment as defined
in the directive 2002/95/EC issued by the European Parliament and of the Council of 27 January 2003. These substances include mercury,
lead, cadmium, hexavalent chromium, polybrominated biphenyls and polybrominated biphenyl ethers.
Rev. 1.1, 2007-03
3
03292006-EO3M-LEK7