WC701 Datasheet, PDF (23/28 Pages) Pulse A Technitrol Company – RF Chip Inductors

WIRE-WOUND RF CHIP
INDUCTORS - 1008CM SERIES
Electrical Specifications @ 25°C
Part Number
Inductance ¹
(nH)
Standard
Tolerance
Optional
Tolerance
Q²
SRF ³
RDC⁴
IDC ⁵
Inc
(MIN)
(MHz MIN)
(Ω MAX)
(mA MAX)
PE-1008CM621JTT
620 @ 25MHz
±5%
±10% (K)
45 @ 100MHz
375.0
1.90
200
620.0
PE-1008CM681JTT
680 @ 25MHz
±5%
±2% (G)
45 @ 100MHz
375.0
2.30
200
680.0
PE-1008CM751JTT
750 @ 25MHz
±5% ±10% (K), ±2% (G) 45 @ 100MHz
350.0
1.60
200
750.0
PE-1008CM821JTT
820 @ 25MHz
±5% ±10% (K), ±2% (G) 40 @ 100MHz
325.0
3.30
200
820.0
PE-1008CM911JTT
910 @ 25MHz
±5% ±10% (K), ±2% (G) 40 @ 50MHz
300.0
2.10
200
910.0
PE-1008CM102JTT 1000 @ 25MHz ±5% ±10% (K), ±2% (G) 40 @ 50MHz
300.0
1.80
200
1000.0
PE-1008CM122JTT 1200 @ 10MHz ±5% ±10% (K), ±2% (G) 40 @ 50MHz
250.0
3.00
200
1200.0
PE-1008CM152JTT 1500 @ 10MHz ±5% ±10% (K), ±2% (G) 40 @ 50MHz
200.0
4.00
150
1500.0
PE-1008CM182JTT 1800 @ 10MHz ±5% ±10% (K), ±2% (G) 40 @ 50MHz
150.0
5.09
150
1800.0
PE-1008CM222JTT 2200 @ 10MHz ±5% ±10% (K), ±2% (G) 30 @ 25MHz
80.0
5.85
150
2200.0
PE-1008CM272JTT 2700 @ 10MHz ±10%
30 @ 25MHz
90.0
7.70
150
2700.0
PE-1008CM332GTT 3300 @ 10MHz ±2%
±10% (K)
25 @ 15MHz
40.0
7.80
150
3300.0
PE-1008CM472JTT 4700 @ 10MHz ±5% ±5% (J), ±2% (G) 16 @ 15MHz
25.0
6.00
150
4700.0
Notes:
1. Inductance measured using a HP4286A RF Impedance Analyzer. (Please note that
inductance information is not stamped on part, because of the extremely small size).
2. Q measured using a HP4291A RF Impedance Analyzer with a HP16193A Test Fixture.
3. SRF measured using a HP8753C Network Analyzer.
Typical Q vs Frequency
4. RDC measured using a Valhalla Scientific model 4100 ATC Digital Ohmeter.
5. Based on a 15�C maximum temperature rise.
6. Component Weight: 0.032 grams typical.
Mechanical
Typical Inductance vs Frequency
Dimensions:
Inches
mm
Pulse Jack
Unless otherwise specified, all tolerances are ± ^.010
0,25
22
www.pulseelectronics.com
WC701.O (01/15)
Electronics