WC701 Datasheet, PDF (16/28 Pages) Pulse A Technitrol Company – RF Chip Inductors

wire-wound rf chip
inductors - 0805cm Series
Notes:
1. Inductance measured using a HP4286A RF Impedance Analyzer. (Please note that
inductance information is not stamped on part, because of the extremely small size).
2. Q measured using a HP4291A RF Impedance Analyzer with a HP16193A Test Fixture.
3. SRF measured using a HP8753C Network Analyzer.
Typical Q vs Frequency
4. RDC measured using a Valhalla Scientific model 4100 ATC Digital Ohmeter.
5. Based on a 15�C maximum temperature rise.
Typical Inductance vs Frequency
Mechanical
Weight ..................0.012grams
Tape & Reel ..............2000/reel
Dimensions:
Inches
mm
Unless otherwise specified,
all tolerances are ± ^.010
0,25
Pulse Jack
WC701.O (01/15)
www.pulseelectronics.com
15
Electronics