YR40.245 Datasheet, PDF (15/18 Pages) PULS GmbH – SINGLE REDUNDANCY MODULE

Y-Series
YR40.245
12-28V, 40A, SINGLE REDUNDANCY MODULE
17. ACCESSORIES
ZM2.WALL Wall mounting bracket
This standard bracket is used to mount the YR40.245 redundancy module onto a flat surface without utilizing a DIN-
Rail.
Fig. 17-1 ZM2.WALL Wall mounting bracket
Fig. 17-2 Assembled wall mounting bracket
ZM12.SIDE Side mounting bracket
This bracket is used to mount the YR40.245 redundancy module sideways with or without utilizing a DIN-Rail.
The two aluminum brackets and the black plastic slider of the unit have to be detached, so that the steel brackets can
be mounted.
For sideway DIN-rail mounting, the removed aluminum brackets and the black plastic slider need to be mounted on
the steel bracket.
Fig. 17-3
ZM12.SIDE Side mounting bracket
Fig. 17-4
Side mounting with DIN-rail brackets
Apr. 2014 / Rev. 1.1 DS-YR40.245-EN
All parameters are specified at 24V, 40A output current, 25°C ambient and after a 5 minutes run-in time unless otherwise noted
www.pulspower.com Phone [phone] Germany
15/18