YR40.241 Datasheet, PDF (14/17 Pages) PULS GmbH – DUAL REDUNDANCY MODULE

Y-Series
YR40.241
12-28V, 40A, DUAL REDUNDANCY MODULE
16. ACCESSORIES
ZM2.WALL Wall mounting bracket
This standard bracket is used to mount the YR40.241 redundancy module onto a flat surface without utilizing a DIN-
Rail.
Fig. 16-1 ZM2.WALL Wall mounting bracket
Fig. 16-2 Assembled wall mounting bracket
ZM11.SIDE Side mounting bracket
This bracket is used to mount the YR40.241 redundancy module sideways with or without utilizing a DIN-Rail.
The two aluminum brackets and the black plastic slider of the unit have to be detached, so that the steel brackets can
be mounted.
For sideway DIN-rail mounting, the removed aluminum brackets and the black plastic slider need to be mounted on
the steel bracket.
Fig. 16-3
ZM11.SIDE Side mounting bracket
Fig. 16-4
Side mounting with DIN-rail brackets
Feb. 2014 / Rev. 1.3 DS-YR40.241-EN
All parameters are specified at 24V, 40A output current, 25°C ambient and after a 5 minutes run-in time unless otherwise noted
www.pulspower.com Phone [phone] Germany
14/17