PIRD20.241 Datasheet, PDF (10/15 Pages) PULS GmbH – DC 12-28V, 20A, DUAL INPUT REDUNDANCY MODULE

PIANO-Series
PIRD20.241
DC 12-28V, 20A, DUAL INPUT REDUNDANCY MODULE
11. PROTECTION FEATURES
Output over-current protection
Reverse input polarity protection
Degree of protection
Over-temperature protection
Input transient protection
Output transient protection
Internal input fuse
not included
included
IP 20
not included
included
included
not included
unit does not start when input voltage is reversed
EN/IEC 60529
see chapter 9 for details and values
see chapter 9 for details and values
12. SAFETY FEATURES
Input / output separation
Safety level of output voltage
Class of protection
no galvanic separation
Schottky diode between input and output
The output voltage is regarded to be SELV (EN 60950-1) or PELV (EN 60204-1, EN
62477-1, IEC 60364-4-41) if the input voltage fulfills the requirements for a SELV
source or PELV source.
III
13. DIELECTRIC STRENGTH
Not applicable (plastic housing and no galvanic isolation)
Sep. 2016 / Rev. 1.0 DS-PIRD20.241
All parameters are specified at 24V, 20A output current, 25°C ambient and after a 5 minutes run-in time unless otherwise noted
www.pulspower.com Phone [phone] Germany
10/15