CS10.243 Datasheet, PDF (1/25 Pages) PULS GmbH – 24V, 10A, SINGLE PHASE INPUT

C-Line
CS10.243
24V, 10A, SINGLE PHASE INPUT
POWER SUPPLY
ƒ AC 100-120V Single-Phase Input
ƒ Width only 60mm
ƒ Efficiency up to 91.3%
ƒ Easy Fuse Breaking due to High Overload Peak Current
ƒ 20% Output Power Reserves
ƒ Full Output Power up to +60°C
ƒ 3 Year Warranty
GENERAL DESCRIPTION
The DIMENSION C-Line units are cost optimized power
supplies without compromising quality, reliability and
performance. The C-Line is part of the DIMENSION
power supply family, existing alongside the high
featured Q-Line.
The CS10.243 includes all the essential basic functions
and the devices have a power reserve of 20%. This extra
current may even be used continuously at temperatures
up to +45°C.
The most important features are the small size, high
efficiency and the wide temperature range.
The unit has an input for 100-120V mains only. This
supports regional applications and offers additional cost
savings without sacrificing functionality.
High immunity to transients and power surges as well as
low electromagnetic emission and a large international
approval package for a variety of applications makes
this unit suitable for nearly every situation.
SHORT-FORM DATA
Output voltage
DC 24V
Adjustment range 24 - 28V
Output current
10A
at 24V, amb <60°C
12A
at 24V, amb <45°C
8.6A
at 28V, amb <60°C
10.3A
at 28V, amb <45°C
Output power
240W
ambient <60°C
288W
ambient <45°C
Output ripple
< 50mVpp
20Hz to 20MHz
AC Input voltage AC 100-120V ±10%
Mains frequency 50-60Hz
±6%
AC Input current 3.71A
at 120Vac
DC Input voltage -
not allowed
Power factor
0.59
at 120Vac
AC Inrush current 85A peak
at 120Vac
Efficiency
91.3%
at 120Vac
Losses
22.9W
at 120Vac
Temperature range 0°C to +70°C operational
Derating *)
6W/°C
+60 to +70°C
Hold-up time
46ms
at 120Vac
Dimensions
60x124x117mm WxHxD
Weight
700g / 1.54lb
ORDER NUMBERS
Power Supply CS10.243
Accessory
ZM1.WALL
ZM13.SIDE
YRM2.DIODE
YR40.241
24-28V Standard unit
(AC 100-120V-Version)
Wall mount bracket
Side mount bracket
Redundancy module
Redundancy module
MARKINGS
IND. CONT. EQ.
UL 508
UL 60950-1
Marine
Class I Div 2
EMC, LVD
Jul. 2015 / Rev. 2.0 DS-CS10.243-EN
All parameters are specified at 24V, 10A, 120Vac, 60Hz, 25°C ambient and after a 5 minutes run-in time unless otherwise noted.
www.pulspower.com Phone [phone] Germany
1/25