PT6880 Datasheet, PDF (39/42 Pages) Princeton Technology Corp – OLED Driver/Controller IC

OLED Driver/Controller IC
Tel : [phone]
Fax: [phone]
URL: http://www.princeton.com.tw
Preliminary
PT6880
Symbol
c
L
L1
A
A1
A2
b
D
D1
E
E1
e
S
R1
R2
θ
θ1
θ2
θ3
Min.
Nom.
Max
0.11
0.23
0.73
0.88
1.03
1.60 BSC
3.40
0.25
0.50
2.50
2.70
2.90
0.22
0.40
23.20 BASIC
20.00 BASIC
17.20 BASIC
14.00 BASIC
0.65 BASIC
0.2
-
-
0.13
-
-
0.13
-
0.30
0^o
-
7^o
0^o
-
-
5^o
-
16^o
5^o
-
16^o
Notes:
1. All dimensioning and tolerancing dimension conform to ASME Y14.5M-19942.
2. Dimensions “D1” and “E1” do not include mold protrusion, allowable protrusion is 0.25 mm per
side.
3. Regardless of the relative size of the upper and lower body sections, dimensions “D1” and “E1” are
determined at the largest feature of the body exclusive of mold flash and gate burrs but including
any mismatch between the upper and lower sections of the molded body.
4. Controlling Dimensions: Millimeters
5. Dimension “b” do not include dambar protrusion. The dambar protrusion(s) shall not cause the
lead width to exceed “B” maximum by more than 0.08 mm. Dambar cannot be located on the lower
radius or the lead foot.
6. Refer to JEDEC MS-022 Variation GC-1
JEDEC is the trademark of JEDEC SOLID STATE TECHNOLOGY ASSOCIATION.
PT6880 pre 1.1
Page 39
Mar. 2002